Before Using The Jrl-2000F; Installation Location; Power Supply - JRC JRL-2000F Manual

-
3
BEFORE USING THE JRL-2000F
-
Installation Location
When determining a location for installing the JRL-2000F, please take the following criteria
into consideration:
Avoid a place that is exposed to direct sunlight or susceptible to overheating.
Avoid humid or dusty places.
*
Do not place containers holding water or other liquids above or on top of the JRL-2000F.
The JRL-2000F draws cooling air in from the front panel and expels it from the rear. Therefore,
do not place any objects within 15 cm of the front and rear panels of the amplifier.
Outlet vent
fl
Rear
$
15 cm mln
J R L - 2 0 0 0 F
\
1
(,
15 cm mln
Use a sturdy table or platform that can easily support the weight of the JRL-2000F
(approximately 28 kg).
Power Supply Requirements
The JRL-2000F consumes approximately 12A of electrical current at an output power of 1000
W when power is supplied at 220 VAC. This must be taken into consideration, along with
the consumption of the exciter, accessories and other home appliances, when choosing an
AC line of sufficient capacity.
For full 1 kW output power a 200-240 VAC line must be used. If a 100-120 VAC line is used,
the maximum rated RF output power is 750W.
If the power outlet has a ground terminal, be sure that the black wire is connected to ground.