vita Sturbridge Assembly Instructions

Lamp post

Advertisement

Quick Links

A S S E M B LY I N S T R U C T I O N S
The Sturbridge/Burton Lamp Post
¡
¢
£
¤
(188 cm)
57 in.
(157 cm)
¥
¦
¢
£
¤
(61 cm)
Please read through before starting assembly.
Check Boxes for These Contents (1 Box)
In the event of missi n g or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to Fri. 8:00 AM to 5:00 PM EST).
1. Lamp Post Top - (1) - 5" x 5"x 58" (12.7 x 12.7 x 147.3 cm) - 10890 White , 14053 Brown
2. Post Coupler (1) - 10725-1 White, 14052 Brown
3. Lamp Post Bottom - (1) - 5" x 5"x 14" (12.7 x 12.7 x 35.5 cm) - 10889 White, 14054 Brown
4. Post Cap (1) - 10789 White, 14051 Brown
5. Decorative Base Molding Trim Cap(1) - 10764 White, 14055 Brown
6. Decorative Base Molding - (1) - 10174-1 White, 14058 Brown
15.24 x 15.24 x 60.96 cm)
7. Decorative Base Molding Insert (1) - 10765 White, 14057 Brown
8. 1-1/2" Self -Tapping Screws (4) - 20005 White, 20031 Brown
9. Vinyl Weld Glue (1) - 20000 White, 20038 Brown
10. Post Trim (1) - 10698-1 White, 14029 Brown

Tools You Will Need

11.
Wheelbarrow or bucket (to mix concrete)
12.
Tape Measure
13.
Level
14.
Shovel
15.
Drill

Purchased Separately

Lamp.
4x4 Pressure treated lumber. - 8' (2.4 m) long
Two bags of pre-mix concrete. *
* Strongly recommended for the stability of this product.

General Information

Read Instructions through carefully before beginning assembly.
When handling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
We recommend an area approx 10'x 8' (3m x 2.4m) for unobstructed handling.

Important Note:

Please refer to local codes before installing outdoor lighting. UF-rated cable should be used for
underground wiring and all materials should be approved by the Underwriter's Laborator (UL). Vita
assumes no liability for errors, omissions or the outcome of any project.
¢
£
¤
§
(13 cm)
©
¥
¢
(183 cm)
¨
¢
£
¤
(15 cm)
¢
£
¤

(7.62 cm)
£
¤
(6"x6"x24" -
8
Not to Scale
www.wearevita.com
Sturbridge/Burton Lamp Post
4
10
5
6
9
7
Ver 5.6/080223
1
2
3
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sturbridge and is the answer not in the manual?

Questions and answers

Summary of Contents for vita Sturbridge

  • Page 1 • Please refer to local codes before installing outdoor lighting. UF-rated cable should be used for underground wiring and all materials should be approved by the Underwriter’s Laborator (UL). Vita Ver 5.6/080223 assumes no liability for errors, omissions or the outcome of any project.
  • Page 2 S T E P ONE Decorative Base Molding Assembly • Start by applying a small amount of glue to the underside of your Base Molding Trim Cap (part #5) and to the top side of the Decorative Base Molding Insert (part #7) as shown •...
  • Page 3 Lamp Post Installation S T E P F I V E Wood Post Installation • Dig a 36" (91.5cm) deep hole in the desired location. Verify the depth of the hole to ensure that the 4x4 wood post will be buried 36"...

This manual is also suitable for:

Burton

Table of Contents