Intended Use - Titan TTB805CHR Manual

Intended use

EN
GB
Intended use
This charger is solely for the charging of batteries listed in the TECHNICAL SPECIFICATION
section.
Charging the battery pack
WARNING! The charger and battery pack are specifically designed
to work together so do not attempt to use any other devices. Never insert
or allow metallic objects into your charger or battery pack connections
because an electrical failure and hazard will occur.
NOTES: If the battery pack is very hot you must remove your battery pack
from the charger and allow time for the battery to cool down before recharging.
1) Insert the battery pack fully in the charger (1) (Fig. 1). Connect the charger to
the power supply. The indicator lights(2) on the charger show the battery status
as described in below table.
Green light
FLASHING
ON
OFF
OFF
10
Fig. 1
RED light
OFF
OFF
ON
FLASHING
Fig. 2
Status
Charging
Fully charged
Battery temperature is too high
(Charging will start automatically
after cooling down).
Battery not in position/Defective battery
TTB805CHR