myTouchSmart SunSmart 33861 - In-Wall Digital Timer, 4 Programmable On/Off Buttons Manual

Table of Contents

Contents

1 Product Overview
2 Set Time
3 Settings
4 Programming Options (Preset)
5 Reset Button
6 Safety
7 Specifications
8 Documents / Resources
- 8.1 References
- 8.2 Download manual

Product Overview

PRODUCT OVERVIEW

Up and down arrows
Press to set current time and schedule programs

Evening preset
Set on/off time to dusk - 12am or +/- 1hr

On/off
Overrides current program

Sunset on/sunrise off time
Set on/off time to sunset/sunrise or +/- 1hr

My extra programs button
Offers seven additional on/off programs

Set button
Press to select various options

My on/off time
Set custom on/off time

My countdown
When active, switch will countdown every time on/off override is activated.

Reset button
Press to reset

Set Time

Use up ( ) and down ( ) arrows to set current time. Take note of the AM/PM setting.

warning Note: When timer is reset, the time will flash.

Settings

Hold Set ( ) for 3 seconds and current time will flash on the screen. Use ( ) to select current time and press Set ().

"YEAR" will flash on the screen. Use ( ) to select the current year and press Set ().

"MONT" will flash on the screen. Use ( ) to select the current month and press Set ( ).

"DAY" will flash on the screen. Use ( ) to select the current day and press Set ( ).

"ZONE" will flash on the screen. Use ( ) to select current zone (see Figure 1). Zone is used to determine sunrise/sunset times.

"DST" (Daylight Savings Time) will flash on the screen. Use ( ) to select "ON" if you would like the timer to automatically adjust for Daylight Savings Time or "OFF" if you would not like the timer to adjust automatically.

FIGURE 1: Location zones for sunrise/sunset times

warning Note: If no button is pushed for 10 seconds, the timer will go back to clock mode. To re-enter settings, press and hold Set ( ) for 3 seconds. Use the ( ) to scroll to the setting you were at.

Once settings are complete, either wait 10 seconds and the timer will automatically go to clock mode, or press and hold "Set" ( ) for 3 seconds.

Programming Options (Preset)

warning Note: If the LED on a button is illuminated, this indicates that the program is active. To deactivate program, press the button again and the LED will turn off.

Evening – Sunset to 12:AM:

Press "evening" button and the sunset time will flash on the screen. Use arrows ( ) to adjust time (time can be adjusted up to 1 hour in either direction) and press Set ( ). Days of the week will flash on the screen. Use arrows ( ) to select the correct day options and press set ().

My On Time:

Press "my on time" button and the clock will begin flashing. Use arrows to set the desired on time ( ) and press Set ( ). (Default is 6PM for all days.) Days of the week will then flash on screen. Use arrows ( ) to select the day(s) you want the timer to be active and press Set ( ).

My Off Time:

Press "my off time" button and the clock will begin flashing. Select desired off time and press Set ( ). (Default is 10PM for all days.) Days of the week will then flash on screen. Use arrows ( ) to select the day(s) you want the timer to be active and press Set ( ).

Sunset On:

Press "sunset on" button and the sunset time will flash on the screen. Use arrows ( ) to adjust time (time can be adjusted up to 1 hour in either direction) and press Set ( ). Days of the week will then flash on screen. Use arrows ( ) to select the day(s) you want the timer to be active and press Set ( ).

Sunrise Off:

Press "sunrise off" button and the sunrise time will flash on the screen. Use arrows ( ) to adjust time (time can be adjusted up to 1 hour in either direction) and press Set ( ). Days of the week will then flash on screen. Use arrows ( ) to select the day(s) you want the timer to be active and press Set ( ).

Extra programs:

This option offers 7 additional On/Off programs. When the "my extra programs" button is pressed "ON 1" will flash on screen but no time will be displayed, only "--:--." Press Set ( ) to select program "ON 1" and the "--:--" will flash on screen. Use arrows ( ) to select time and press Set ( ). Days of the week will then flash on screen. Use arrows ( ) to select the desired days of the week and press Set ( ).
Program On 1 ("ON 1") is now set. To go to the next program, use the arrows ( ) and press SET ( ) on the next program you want to set. Repeat these steps for Program Off 1 ("OFF 1"), Program On 2 ("ON 2"), Program Off 2 ("OFF 2"), etc.
To skip through without setting, simply stop pressing buttons and the display will revert to clock mode after 10 seconds. You can also use the arrows ( ) to scroll through the options without setting a time. After Program Off 7 ("OFF 7"), the menu will start over with Program On 1 ("ON 1"). The LED indicator light will remain on if any of the additional programs are set.

To delete one of the extra programs: Use arrows ( ) to choose the program you wish to delete and press ( ) to select program. Use arrows ( ) to scroll time back to between 11:59pm and 12:00am. The display will show "--:--" to confirm the program has been deleted. No additional steps are needed. The display will revert back to clock mode after 10 seconds or press Set ( ).
warning Note: When Program On is set to "--:--", screen will flash "DELE" to confirm program has been deleted.

Countdown Mode:

Press "my countdown" button, the countdown time will be flashing. Use arrows ( ) to adjust the countdown time. The switch will now count down for the time set every time the on/off or door override is used. While timer is in countdown mode, the timer will run the programs normally but will use the countdown time every time the on/off override is selected.

Reset Button

To set the timer back to factory settings, press the reset button () with a toothpick. The reset button can be found behind the door in between the "my extra program" and the "my countdown" buttons. You can access the button by either removing the door or by holding the door at a 90 degree position and use the toothpick to depress the reset button.

Safety

RISK OF ELECTRIC SHOCK

SHUT OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE INSTALLATION
DO NOT USE IN WET LOCATIONS
USE INDOORS ONLY

RISK OF FIRE

DO NOT USE TO CONTROL APPLIANCES THAT CONTAIN HEATING ELEMENTS (COOKING APPLIANCES, HEATERS, IRONS, ETC.)
DO NOT EXCEED ELECTRICAL RATINGS
USE COPPER WIRE ONLY WITH THIS DEVICE
DO NOT USE TO CONTROL RECEPTACLES

Specifications

120VAC 60Hz
15A (1800W) General Purpose/Resistive
10A (1200W) Tungsten
1200 VA Ballast
5A Electronic Ballast
1/2 HP Motor
Works with dimmable LED and CFL bulbs.

Questions?
Contact us at 1-800-654-8483 between 7:00AM–8:00PM CST.
www.byjasco.com