Jeecoo J65 - Headset Manual

Product parts diagram

How to Set Up

On Windows PC:
Control Panel > Sound Settings> Set Output/Playback to "USB Audio Device" > Set Input/Recording to "USB Audio Device" > Save Changes

On Mac Devices:
Apple Menu > System Preference> Set Output to "USB Audio Device" > set Input to "USB Audio Device" > Save Changes

Virtual 7.1 Surround Sound Software

Note: only applicable for devices with Windows 7/S/10 Operating System.

Software Requirement
Platforms Windows 7/8/10
120 MB of free hard drive space for installation

Download

Link to download software: driver-jeecoo.com

If you can't download the software correctly, it's the setting problems of your web browser; you can switch to a different web browser (Chrome/Firefox recommended) for downloading.

Installation

1. Extract the ZIP, IFile after downloading to your computer;
2. Connect the headset into computer vie the USB side port:
3. Double Click the "Setup" icon to for installation;
4. Installation finished.

Use of Software

1. After installation„ you'll find the " Rear Audio Center" App on desktop,'
2. Double click the App to run the software;
3. Right click for more setting options:
   
   

Product Specifications

Speaker Size	50.00mm	Microphone size	6*2.7mm
Sensitivity	121dB±3db	Microphone sensitivity	-38±3dB
impedance	32±15%	Microphone impedance	2.2K
Frequency Range	20HZ-20KHZ	Microphone type	Omnidirectional
rated power	25MW	'Test current	0.3±0.1mA
Maximum power	30MW	Frequency Range	50Hz10KHz
Wire length	2m±0.15m/6.6 feet	Headphone jack	USB