myQ LiftMaster myQ-SGC2WCH, myQ-SGC2WLM - Smart Garage Camera Manual

What's In the Box

Connect Your Smart Garage™ Camera

Use the myQ® App, your mobile device, and your router to control your Smart Garage™ Camera.

Before You Start:

1. Be sure your mobile device's Wi-Fi® is on and displays a strong signal where the camera will sit.
2. Check that Bluetooth is enabled on your mobile device.
3. Enable Location Services on your mobile device.
4. Download the myQ® App.
   TIP: If you already have the myQ® App, confirm you have the latest version to optimize your myQ® experience.
5. Create or sign in to your account.
6. Add your Smart Garage™ Camera to your myQ® account.

Preparation

Check Your View Before You Mount:

• Power up the Smart Garage™ Camera in your chosen mounting area.
• Ensure Smart Garage™ Camera is in reach of the included 6' Micro-USB power adapter.
• Hold the camera at your chosen mounting area, free from visual and metal obstructions. Check your mobile device view shows what you want to see before you mount.
• Remove the protective lens cover film.

See the Smart Garage™ Camera installation video at support.chamberlaingroup.com.

This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Available on most iOS and Android Devices

Mount the Smart Garage™ Camera

For Indoor Use Only

Items You May Need:

• Ladder
• Philips Screw Driver
• Drill and.25" diameter Drill Bit (drywall mount only)
• Hammer

Choose from Options A or B

Option A: Set to Garage Door Opener

1. Determine whether the garage door opener has a plastic or metallic cover. For plastic, clean desired mounting location using included alcohol wipe ensuring location is clean of all dirt/debris and is allowed to dry. Peel liner from adhesive (from the mounting plate), do not touch adhesive and place the plate to desired clean area and apply moderate pressure for a minimum of 15 seconds. Wait 1 hour before placing the camera onto the magnetic mounting plate to allow the adhesive bond to reach maximum strength. Place the camera on the magnetic mounting plate. For metallic covers, no disk is required. Simply place the camera base to the metallic cover.
2. Face the camera head toward the desired location.

Option B: Surface Mount

1. Determine if the camera will be mounted to drywall or a stud. For drywall mount, pre-drill a.25" diameter hole and lightly tap the anchor into the hole using a hammer. Install the mounting plate using the supplied screw. For stud mount, do not use the anchor and install the mounting plate using supplied screw.
2. With the Smart Garage™ Camera head facing in the desired visual location, attach it to the magnetic mounting plate.

Connect Power

1. Power your Smart Garage™ Camera with the included micro-USB power adapter. The LED lights solid white. After approximately 40 seconds, the LED flashes blue, bluegreen, then solid green. You are now connected.
   
   Keep the cable away from all moving garage door opener and other parts.
2. From the myQ® App, tap your camera and the live video displays.
3. Adjust the Smart Garage™ Camera, twisting the posable camera head to change the viewing angle.

Documents / Resources

References

• Support
• http://www.p65warnings.ca.gov
• App Store - Apple
• Google Play

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download myQ LiftMaster myQ-SGC2WCH, myQ-SGC2WLM - Smart Garage Camera Manual