Anynet - Samsung HT-AS720S Instruction Manual

Anynet+

Using Anynet+(HDMI-CEC)
1
Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 17)
2
Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
•
You can operate the AV receiver by using the TV remote control.
(Available TV button : VOLUME
MOVE ENTER EXIT
MOVE ENTER EXIT
MOVE ENTER EXIT
18
All manuals and user guides at all-guides.com
, button.)
If you select TV
Set the Anynet+(HDMI-CEC) function to <On> on your TV.
•
Receiver : On : You can listen to audio through the AV Receiver.
•
Receiver : Off : You can listen to audio through the TV.
If you select the DVD Player
Select THEATER to connector and set the option of each items below.
•
View TV : If Anynet+(HDMI-CEC) set to on and you select View TV, the AV receiver will
automatically switch to SAT OPTIC2(DIGITAL IN).
•
Receiver : On : You can listen to audio through the AV receiver.
•
Receiver : Off : You can listen to audio through the TV.
To turn off Anynet+
1 Press SETUP/MENU button, and then press the ENTER button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
œ √
2 Press button to select the "ANYNET+ MODE", and then press the ENTER button.
3 Press the ...† button to set ANYNET+ to OFF.
- If you are using Anynet+, set ANYNET+ to ON and if not, set it to OFF.
To exit setup mode
Wait for about 5 seconds or press SETUP button.
•
"SETUP OFF" appears on the display and Setup Mode is exited.
• When selecting View TV, you must have a digital optical cable connected
from the TV to the AV receiver to listen to the TV sound through the AV
receiver.
• When you are making Anynet+ connection, do not connect more than two AV receivers
Caution
(Anynet+ installed). Otherwise, it can cause a malfunction.
With Anynet+
You can operate this unit, power on your TV, or watch a movie by pressing the Play button on
your Samsung TV's remote control.