Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Keiser DS-3000
- Page 1 User Manual Drywall Sander Model: DS-3000 Page 1 of 16...
-
Page 2: Product Description
USER MANUAL – Drywall Sander DS-3000 1. PRODUCT DESCRIPTION The machine is designed for sanding drywalls, ceilings and walls of the inner and outer surfaces, clearing the floor residues, paint coatings, adhesive and loose plaster etc. Our machine is not suitable for processing the object containing asbestos. -
Page 3: Safety Instructions
USER MANUAL – Drywall Sander DS-3000 3. SAFETY INSTRUCTIONS The following pictograms appear throughout these operating instructions: Indicates danger of injury, risk to life and possible damage to the appliance if these instructions are not followed. Indicates the presence of electric shocks. -
Page 4: Electrical Safety
USER MANUAL – Drywall Sander DS-3000 1) Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. - Page 5 USER MANUAL – Drywall Sander DS-3000 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
- Page 6 USER MANUAL – Drywall Sander DS-3000 Do not put down the machine when it isn’t stopped completely. Otherwise, you will loss control to the machine. Cleaning the exhaust port on your machine in regular. When working, control the machine firmly with both hands to ensure safe operation.
- Page 7 USER MANUAL – Drywall Sander DS-3000 6.2 Electronic Control This machine has the characteristics as below： Lock-on switch [1-3]； Adjustable Speed [1-4] Adjust the speed from 800-1700rpm by turning the speed wheel [1-4]. In this way, user can choose different speed for different sanding surface.
- Page 8 USER MANUAL – Drywall Sander DS-3000 6.4 Stick the Sanding Paper to the Pad【1-6】 Please ensure the holes on the sanding paper to fit the holes on the pad accurately. 6.5 LED【1-7】;【1-8】 LED light, 3.8 W can work in a dark environment.
- Page 9 USER MANUAL – Drywall Sander DS-3000 6.7 Grinding Adjacent Edges【1-10】 Detachable brush segment can reach up to the adjacent edge with ease. 6.8 To change the dust hose. [1-11] Loosen the hoop by the screwdriver; take out the dust hose...
-
Page 10: Operate The Machine
USER MANUAL – Drywall Sander DS-3000 [1-13] 6.9 Disassemble the extension rod When disassemble the extension rod, pls must press the limited knob, then take out the extension rod. 7. OPERATE THE MACHINE Do not control the machine’s head. Hold the machine with both hands. - Page 11 USER MANUAL – Drywall Sander DS-3000 Carbon brushes If excessive sparking occurs you must have the carbon brushes checked by a qualified electrician. Attention! Only a qualified electrician is allowed to change the brushes. 9. CORRECTIVE ACTION IN CASE OF FAILURE (1) The operating switch is switched on, but the motor is not working.
-
Page 12: Environmental Protection
USER MANUAL – Drywall Sander DS-3000 10. LABELS ON YOUR TOOL (if any) Volts Hertz Alternating current Watts No load speed /min or Revolutions or reciprocation per minute Class II tool To reduce the risk of injury, user must read instruction manual... - Page 13 USER MANUAL – Drywall Sander DS-3000 Page 13 of 16...
- Page 14 USER MANUAL – Drywall Sander DS-3000 Page 14 of 16...
- Page 15 USER MANUAL – Drywall Sander DS-3000 Page 15 of 16...
- Page 16 USER MANUAL – Drywall Sander DS-3000 Page 16 of 16...
Need help?
Do you have a question about the DS-3000 and is the answer not in the manual?
Questions and answers