Core Products VEGAS VG108 Manual

Core Products VEGAS VG108 Manual

Advertisement

Quick Links

VEGAS WORKSTATION
REF. VG108
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton for 48 hours or more so the contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.

Information about your furniture.

This furniture range has been carefully crafted from melamine faced manufactured board.
Each piece is manufactured to the highest standards using specialised computer controlled machinery to ensure accuracy.

Caring for your furniture.

Extreme temperature can cause slight movements in the board material so please avoid placing your furniture close to radiators or other direct sources of heat.
Please avoid exposing your furniture to continued bright sunlight as this can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
Always use place mats, coasters or tablecloths to help protect against scratches and accidentally dropped items. Always use heat resistant mats when placing hot or
cold items on to surfaces.
Do not sit or stand on your furniture.

After care.

Wipe all surfaces with a dry cloth and the occasional use of a normal household furniture polish and a household glass cleaner on glass surfaces.
Please do not use detergents or chemicals on your furniture.
After assembly remove all visible component identification stickers, these should remove easily however any remaining adhesive residue can be easily removed with
a label adhesive removal liquid available from most DIY or hardware stores.

BEFORE YOU START ASSEMBLY

Please check that you have all the
correct parts and fittings as detailed
on the assembly instructions.
We recommend that you build your
furniture on top of a soft clean cover to
ensure the unit does not get marked or
damaged during assembly.
FOR DAMAGED/REPLACEMENT PARTS
Please visit
www.coreproducts.co.uk/parts
BATCH
NUMBER
PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY
NOTE / RECEIPT FOR FUTURE REFERENCE.
75 min
Height: 1196 mm
Width: 691 mm
Depth: 448 mm
Core Products 10/2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VEGAS VG108 and is the answer not in the manual?

Questions and answers

Summary of Contents for Core Products VEGAS VG108

  • Page 1 FOR DAMAGED/REPLACEMENT PARTS Please visit www.coreproducts.co.uk/parts BATCH NUMBER PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY NOTE / RECEIPT FOR FUTURE REFERENCE. Core Products 10/2020...
  • Page 2 ASSEMBLY HARDWARE Colour 1 Cover Caps Dowel Minifix Bolt Minifix Cams Colour 2 Cover Caps Nail-on Glide Wall Fixing Kit (Includes screws) ASSEMBLY PARTS MAX SUGGESTED LOADS 5 Kg. 15 Kg. A - x1 D - x1 G - x1 B - x1 E - x1 H - x1...
  • Page 3 Gently hit to adjust. Gently hit to adjust. Repeat this in the Repeat this in the following steps. following steps. Page 3...
  • Page 4 Rotate 180° Gently hit to adjust. Repeat this in the following steps. Rotate Page 4...
  • Page 5 Rotate to tighten Gently hit to adjust. Page 5...
  • Page 6 Gently hit to adjust. Rotate to tighten Page 6...
  • Page 7 Rotate to tighten Gently hit to adjust. Rotate to tighten Gently hit to adjust. Page 7...
  • Page 8 -WARNING! TIPPING HAZARD – Unanchored furniture can tip over -WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING. -IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED) -Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit. Attach the other end of the fixing strip to the back edge of the furniture top using the 15mm screw + washer and securely tighten.

Table of Contents