☐
Reinstall the fan stator.
☐
Reinstall the fan shroud.
☐
Reinstall the coolant reservoir (if removed).
☐
Reinstall the OEM air intake assembly.
☐
Replace any dashboard panels and other covers removed during installation.
☐
Connect the battery(s).
☐
Reinstall the reservoir onto the fan shroud and reconnect the secondary
radiator hoses (if previously removed).
☐
Close the drain on the secondary radiator and fill with the coolant saved earlier
in the installation (if previously drained).
☐
Check all VMAC and OEM wiring to ensure it will not contact any hot, sharp
or moving components and will not interfere with the operation of the vehicle.
Secure all wiring with rubber coated P-clips, cable ties and loom as required.
☐
Check all VMAC and OEM hoses and tubes to ensure they will not contact any
hot, sharp or moving components and will not interfere with the operation of
the vehicle. Secure all hoses and tubes with rubber coated P-clips, cable ties
and loom as required.
40
VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com