Indicator
Name
Safety Support
Indicator (Amber)
* Not available on all models
On/Blinking
●
Comes on if there is a problem with Road
Departure Mitigation system, CMBS
Speed Braking Control
*
or blind spot
information system
*
.
Indicator may come on temporarily when
●
the Maximum Load Limit is exceeded.
Comes on if the Road Departure Mitigation
●
system, CMBS
TM
and Low Speed Braking
Control
*
are deactivated temporarily after
the battery has been disconnected and
then re-connected.
Explanation
●
Stays on constantly - Have your vehicle checked
TM
, Low
by a dealer.
Make sure the total load is within the Maximum
●
Load Limit.
2 Maximum Load Limit P. 445
Stays on constantly - Have your vehicle checked
●
by a dealer.
Drive a short distance at more than 12 mph (20
●
km/h). The indicator should go off. If it does not,
have your vehicle checked by a dealer.
uuIndicatorsu
Continued
109