Kenwood GE-9X Instruction Manual page 6

OPERATING INSTRUCTIONS
(A) To record the signal selected with the LINE
switch and listen to the signal after equalization
Procedure:
1) Set the LINE switch of INPUT SELECTOR to ON
2)Sei the EQUALIZER swilch so that the LED
indicators in thi ide controls light
31Set the REC switch so that the REC indicator
does not light.
A) Set the SOURCE switch of REC SELECTOR to ON
5) Operate the tape deck A or B to record the signal
(B
To listen to a source signal after equalization and
record the processed signa! on tape deck A or B.
Procedure
1) Set the REC switch so that the REC indicator
tights
2) Repeat steps ti, 2) , 4) and 5) in procedure (Ai
{C) To listen to a source signal after equalization
while dubbing from tape A to B.
Procedure:
1) Repeat stops 1) and 2) in procedure (A)
2) Depress the REC Aw B switch of REC SELECTOR
to ON
3) Playback tape on the tape deck A and record on
tape B
(D To fisten to a source signal after equatization
while dubbing trom tape B to tape A.
Procedure:
4) Repeal sleps 1) and 2) in procedure {A}
3s the REC Be A switch of REC SELECTOR
6 Ge sxili
TAPE DECK B
TAPE DECK A
From TAPE REC
of amp.
'or receiver
To TAPE PLAY
of amp.
of receiver
GE-9X
TAPE DECK B
To TAPE PLAY
of ainp.
or receiver
GE-9X
TAPE DECK A
From TAPE REC
of amp
or receiver
To TAPE PLAY
of amp.
or receiver
TAPE DECK B
TAPE DECK A
From TAPE REC
of amp.
To TAPE PLAY
of amp.
or receiver or receiver