Universal Audio 533 Manual page 15

3.
Using the #8-32 screws and lock washers, mount one angle
and
one spacer plate
to
each side of the 533 assembly. The
spacer plates should
be
located between
the
angles
and the
533 chassis.
The mounting holes
in
the 533 are tapped,
so nuts are not required. Do not tighten the screws
at
this
time.
4.
The 533 front panels are adjustable
to
allow optimum
alignment
of the
front panels with
the
rack mounting angles.
For precise alignment, loosen
the
front panel mounting
screws, as well
as the top and
bottom cover
screws (1/2
turn
is
adequate). Adjust
the
relative positions
of the
angles
and
panels, and then tighten
all hardware.
SEE SECTION
2.5
BEFORE INSTALLING THE ASSEMBLY IN A RACK.
18-32 Pan Head Screw
18
Lock Washer
16-32 Nut
#6
Lock Washer
16-32 Oval Head Screw
cover screws
Angle
Rack Extension
front panel mounting screws
FIGURE
4.
MOUNTING DETAILS
FOR SR -21 RACK MOUNT KIT.
cover screws
18-32
Screw
18
Lock Washer
front panel mounting screws
Joining Plate
Spacer Plate
Angle
FIGURE
5.
MOUNTING DETAILS FOR
DR -21
RACK MOUNT
KIT.
-10-