The auto tuner setup function is described on page 25 as the interactive plug-in menu.
If you
need to run the auto tuner setup again, follow the steps below.
Press the MENUbutton
J.V
To AUTO TUNER SETUP
I_
To operate
_1_
To choose CABLE orAIR
Press the OK button to start
TUNER
MODE
{ AIR_
_RESS rOS'rART
Programming will take approximately
2 to 4 minutes.
The auto tuner is finished when the
message PROGRAMMING
OVER! appears onscreen.
(_
Press the Menu button when finished