Akai GX-266D Service Manual page 8

8. PAUSE ADJUSTMENT (Refer to Fig. 5)
1) At playback mode, lock Pause Lever.
2) Adjust Pause Lock Plate position to obtain a 0.3
to 0.5 mm clearance between Pinch Roller and Cap-
stan.
3) When making this adjustment, be careful that the
clearance between Pinch Roller and Capstan does
not exceed 0.5 mm.
4) Confirm that the Quick Tension Microswitch is
pushed when the Pause Lever is depressed and if
not, adjust with QT Lever B.
pHs SUPPORT ANGLE
t O.tmm
CAPSTAN eal
|
|
¥. <<
ae {OI}
2
ADJUSTMENT WASHER
CAPSTAN SHAFT: |
Fig. 6
TANSION MICRO SWITCH SW-904
Fig. 7
FIXATION SCREW
PIPE EL LO LIL ORCL LILEL ED
(iF
TAPE GUIDE
te, TAPE
TENSION ARM
ADJUSTMENT WASHER
* LOWER THE GUIDE DOWN A LITTLE
ADJUSTMENT WASHER
XLFT THE GUIDE UPA LITTLE
Fig. 8
(Refer to Fig. 9)