Refrigerator Light - Atag KS33178D Instructions For Use Manual

Refrigerator with freezer
Table of Contents

Advertisement

Available languages

Available languages

EN
Use & Care guide

Refrigerator light

The light system inside the refrigerator compartment uses LEDs light, allowing a better lighting than traditional light bulbs as
well as a very low energy consumption . Contact the Technical Assistance Service if you need a replacement .
Important: The refrigerator compartment light switches on when the refrigerator door is opened .
Replacing the led light bulb (depending on model)
Always disconnect the appliance from the power supply before replacing the light bulb . Then follow the instructions based
on the type of light bulb for your product . Replace the light bulb with one with the same features, available from the Technical
Assistance Service and authorised sellers .
Light type 1)
To remove the light bulb, unscrew it in an anti-clockwise direction, as shown in the
figure . Wait 5 minutes before reconnecting the appliance .
LED light bulb (max 25W)
Light type 2)
If the product has LED lights, as demonstrated in the figures below, contact the Technical Assistance Service if you need a
replacement . LEDs last longer than traditional light bulbs, improve internal visibility and are environmentally-friendly .
Shelves
All of the drawers, door shelves and shelves can be removed .
Door
Door reversibility
Note: The direction of door opening can be changed. If this operation is performed by After-sales Service it is not covered by the warranty.
Installation Guide .
Follow instruction in
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ks13178dKd63178dKd63194d

Table of Contents