Recording and playing loops
1.
Press
.
This starts loop recording.
2.
Stop recording and start loop playback.
If the recording time is set to "Manual"
Pressing
start loop playback.
If the recording time is set to " ×1–64"
When the set recording time is reached, recording will stop and loop playback will start.
3.
Press
.
This stops loop playback.
NOTE
• During rhythm playback, recording will start after the precount.
• Sound input through the AUX IN jack will not be recorded.
HINT
• During rhythm playback, quantization is enabled so even if the recording ending time is not exact, the
loop will automatically be adjusted so that loop playback stays in time.
• During loop playback, you can switch MEMORY, STOMP and EDIT modes.
again or allowing the maximum recording time to be reached will stop recording and
50