Table of Contents
Advertisement
SIZE & POSITION
Menu
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
SETUP&RESET
3-5
Moves the position of the display area on the screen horizontally.
•
This function is only available in Analog mode.
Moves the position of the display area on the screen vertically.
•
This function is only available in Analog mode.
Supplied for the wide models only such as 16:9 or 16:10.
PC signals
•
<Auto> - The picture is displayed at the aspect ratio of the input signal.
•
<Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
•
A signal not in the standard mode table is not supported.
•
If the resolution is set to the optimal resolution, the aspect ratio does not change whether the
<Image Size> is set to <Auto> or <Wide>.
You can adjust the horizontal position of the OSD.
You can adjust the vertical position of the OSD.
Description
Using the product
Advertisement
Table of Contents
