Advertisement
Advertisement
Table of Contents
Summary of Contents for li & tai SLT-6035
- Page 1 WOODEN CLOCK INSTRUCTION...
- Page 2 1.Feature ◆ Calendar within years 2000-2099 ◆ Display mode : At the same time display time, temperature. Time, temperature and date circulation show. Show time, minute and second at the same time. ◆ 12/24 hour time format selectable. (initial mode: 24-hour; January 1, 2021;Time 12:00) ◆...
- Page 3 YEAR,MONTH,DATE,12H/24H ,HOUR,MINUTE and ALARM in order. ◆ When YEAR symbol flashing , adjust by “UP”and “DOWN”buttons. ◆When MONTH, “UP”and “DOWN”for adjustment. ◆When DATE, “UP”and “DOWN”for adjustment. ◆When 12H/24H , Turn-up and 12/24 hour format swift. ◆When HOUR, “UP”and “DOWN”for adjustment. ◆When MINUTE , “UP”and “DOWN”for adjustment.
- Page 4 4:Button“DOWN”:turn down or sound control on/off Turn down for adjustment when setting. In normal displaying “on SD”, while off, displaying “--SD” 5:Swift 12 hour format display, When “PM”, the light on the up corner will be on. Important as to 3*AAA batteries ,high-capacity alkaline batteries shall be used;...
Need help?
Do you have a question about the SLT-6035 and is the answer not in the manual?
Questions and answers
How do you wake the clock back up after it that gone to sleep?
To wake up the Li & Tai SLT-6035 clock after it has gone to sleep, press the “DOWN” button to turn on sound control. When sound control is on, the display will show “on SD”. Making a sound or tapping the clock can also wake it.
This answer is automatically generated
The display will not stay on. I push the down button and set it to "on SD," but the display turns off in a few seconds. If I push the down button again, it has reset to "-- SD." How can I get it to stay on?
To keep the display on for the li & tai SLT-6035, ensure that the sound control function is off. In normal display mode, if "on SD" is shown, sound control is on, meaning the display turns off when no sound is detected. To disable this function and keep the display on, press the "DOWN" button until it shows "--SD".
This answer is automatically generated
How do you wake tye clock back up once it has gone to sleep??