Connecting A Cassette Recorder - Radio Shack TRS-80 Manual

Fig. 3
7. Replace the cover.
Fig. 4
8. Replace the paper.
Connecting a Cassette Recorder
Use the supplied Cable to connect a Cassette Recorder to the Printer/
Interface, as shown in figure.
Connect the plugs on one end of the Cable to the jack on the Interface.
Attach the plugs on the other end of the Cable to the Cassette Recorder.
Note: For a reliable means of storing your programs and data on tape,
we recommend Radio Shack's 14-812 Recorder.
TO TO PRINTER/
CASSETTE CASSETTE
RECORDER INTERFACE
~ CASSETTE *
For information concerning operation of the Cassette (CSAVE, CLOAD,
etc.), see your Computer's Owner's Manual.
Remote Switch
Keep the REMOTE switch in the ON position when the Cassette Recorder
is to be used by the Computer. If the switch is ON, the Cassette will start
when you CSAVE or CLOAD and stop when the operation is complete.
If you want to manually start or stop the recorder, the switch should
remain OFF. This will enable you to manipulate the tape without
removing the black plug from the REMOTE jack of the Cassette Recorder.
7