Indication Of The Operating Parameters - Info Menu - Beko BEKOBLIZZ LC 480 Instructions For Installation And Operation Manual

Technical description
11.16.3 Indication of the operating parameters – Info menu
The Info menu shows the dynamic operating parameters of the chiller.
When the chiller is ON and you are not in other menus, press
Access to the Info menu is indicated on the display by the message
and arrows to move to the next or previous point. Press
displayed. Press again to return to the list of displayable parameters.
info
Press to leave the Info menu (if, after a period of two minutes, no button is pressed, the menu is exited
ESC
automatically).
Info
T1 – Temperature probe T1 – dew point
T2 – Temperature probe T2 – Air IN
T3 – Temperature probe T3 – Compressor suction
T4 – Temperature probe T4 – Compressor discharge
HP – Condensation pressure HP
HrS – Total number of operating hours
SrV – Hours to the next maintenance
Note:
The temperatures are indicated in °C or °F (LED
The pressure is indicated in bar(g) or psi(g)(LED
The total operating hours and the hours until the next maintenance are indicated in the field 0...999 hours,
and in thousand hours from 1.0 hours onwards (example: when the display shows 35, this means 35 hours
and when the display shows 3.5, this means 3,500 hours).
30
for at least one second to access the Info menu.
info
(first parameter of the menu). Use the
to have the value of the selected parameter
info
Description
or is on).
or is on).
BEKOBLIZZ® LC 480-720