Directing The Display Output When You Turn On The Computer - Toshiba Portege M750-S7221 User Manual

74
Getting Started
Using external display devices

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
NOTE
The quickest way to change the display output settings is to use the
display hot key (
1 Press
2 While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(the last two options are available if an external monitor is
connected):
❖
❖
❖
❖
(Sample Image) Display options window
3 Release the
Some modes are only available with the appropriate device attached
and turned on.
+ ):
Fn F5
and simultaneously.
Fn F5
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
Dual monitor different image
Fn key.
Fn , press F5 repeatedly until the setting
F5