Advertisement

Quick Links

VERSION NO.:
LAST UPDATED:
HANDBOOK
HANDBOOK
3.2
28 January 2016
Manufactured by:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAL2K-ECO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DDS CAL2K-ECO

  • Page 1 HANDBOOK HANDBOOK VERSION NO.: LAST UPDATED: 28 January 2016 Manufactured by:...
  • Page 2: Table Of Contents

        INTRODUCTION ...................... 1     HOW TO USE THIS MANUAL ................1     HISTORY OF DDS BOMB CALORIMETERS .............. 1     USER INFORMATION AND HELP AIDS ..............3     E2K HANDBOOK ....................3    ...
  • Page 3: Introduction

    Vessel. samples can be carried out every hour. You have chosen the CAL2K-ECO Bomb Calorimeter System, which is best suited for your calorimetry requirements. HOW TO USE THIS MANUAL This Manual makes use of some informative symbols or icons, in order to bring your attention to the text.
  • Page 4 CP500. In 2005, dds realized the need for a smaller, low sample volume, and inexpensive calorimeter system with the same accuracy and reliability of the CAL2k. Based on these requirements, the ECO was then created as an alternative system to the CAL2k.
  • Page 5: User Information And Help Aids

    • CAL2K APPLICATION NOTES Application notes supplied on the CD are all the samples dds has tested using the CAL2k bomb Calorimeter System. There are different types of applications namely: Fuel Oils, Ammunition, Coal, Food & Nutrition, and Alternative Energy Sources.
  • Page 6: System Components

    SYSTEM COMPONENTS THE E2K COMBUSTION CALORIMETER SYSTEM PLEASE NOTE: If you have purchased the Minimum System configuration, the CAL2K-2 Cooler will not be included with your order as it does not form part of that configuration. If you have purchased the Standard or Elite System configurations the CAL2K-2 Cooler is included with your order.
  • Page 7: The E2K-Fan Air Cooler

    THE E2K-FAN AIR COOLER PLEASE NOTE: ONLY supplied as part of the Minimum System configuration. The Air Cooler is used to cool a warm Vessel back to the approximate ambient temperature in approx. 20 to 30 minutes. Width 130mm Height 180mm Depth 170mm...
  • Page 8: Installation

    INSTALLATION UNPACKING AND INSPECTION By the time you read this Manual, you would have unpacked the e2k System. There are no special precautions to be taken. The following check list is for your convenience: Locate and tick-off the various system components as indicated on the Packing List provided. Unpack and inspect all the system components such as the e2k Calorimeter, the E2K-2 Cooler or e2k Air Cooler, the E2K-3 Filling Station, and the CAL2K-4 Vessel according to the instructions in the relevant sections in this Manual.
  • Page 9 4.2.2 SITE SELECTION The e2k Calorimeter is a desktop unit, which can be installed wherever the laboratory space permits, with two restrictions: The measuring chamber (Well) of the e2k Calorimeter should not be exposed to very drastic temperature changes. The Calorimeter’s chamber (Well) is double insulated to minimise the effect, however, good installation helps.
  • Page 10: Safety Precautions

    SAFETY PRECAUTIONS CALORIMETER (CAL2K-E2K) Electrical Shock: There are no user serviceable parts inside. • Do not open the back panel unless the mains cable has been disconnected. • Dangerous voltages will be present inside the unit after the mains cable has been •...
  • Page 11: Vessel (Cal2K-4)

    Therefore it is advisable to have your Vessel(s) checked regularly. Vessels will need to be returned to dds for reconditioning, an agent is not authorised to recondition a Vessel and therefore it must be sent to dds for this procedure.
  • Page 12: Certifications

    CERTIFICATIONS E2K HANDBOOK V3.2 Website: www.cal2k.com...
  • Page 13: Warranty

    OWNER’S WARRANTY In the event of the Owner contracting directly with Digital Data Systems (Pty) Ltd “dds”, or in the event of the installation of a unit arising out of a contract between the Owner’s Dealer or any other party on his/her behalf and the said “dds”, the Owner records that not withstanding same, this...
  • Page 14: General - Warranty Void

    GENERAL – WARRANTY VOID All serial numbers on any relevant “dds” Scientific product need to remain on the product at all times, or warranty will be void. Warranty will also be void if any of the branding stickers or decals have been removed and/or the colour of the Scientific product has been changed in any way.
  • Page 15 WARRANTY REGISTRATION FORM SERIAL NUMBERS (S/N): Calorimeter: _____________________________ Cooler/Air Cooler: _____________________________ Filling Station: _____________________________ Vessel(s): _____________________________ Other: _____________________________ DEALER NAME: _____________________________________________________________ OWNER’S/CUSTOMER’S COMPANY NAME: _______________________________________ AUTHORISED BY: _____________________________________________________________ INSTALLED AT: _____________________________________________________________ TEL NO: ____________________________ FAX NO: ______________________________ CONTACT PERSON: ________________________________________________________ INSTALLED BY: _____________________________________________________________ DATE INSTALLED: ____________________________...

This manual is also suitable for:

Cal2k-e2k

Table of Contents