Panasonic Omnivision PV-M1349 Operating Instructions Manual page 14

imer Features
ON-TIMER with Alarm A check list before you begin.
Combination VCR can be set to automatically power on in one [) The clock is set to correct time.
of 3 modes (TV, Playback, or FM radio.) You can also combine the
On-Timer with a one minute alarm that gradually increases in volume.
! : Set the ON-TIMER DATE.
1) Press AY¥ to
* Make sure a tape is
inserted if Playback
* ON-TIMER mode selection order Lacing ae
° See ° adio Setup"
CHO2——CHO3"«++ Cine) on page 18 and 19 for
CHO1
PLAY
instructions on how to
preset FM stations.
FM9—~—FMB8:---+ FM1
select "ON" or
"OFF."
CANCEL :ADD/DLT KEY
SELECT :4 ¥ KEY
SET im» KEY
END :ON-TIMER KEY
When "ON" is selected,
an alarm will gradually increase in volume for one minute or
until cancelled by pressing any button (including VOL <> .)
To Make Corrections,
use AV and <P to move back and correct as necessary.
ee eee
4. 2] SetONTIMER. | aos ki
Press ON-TIMER.
> VOL UP
¢ ON TIMER indicator lights on the
4 VOL DOWN
Combination VCR.
To cance! ON-TIMER set,
press ON-TIMER to redisplay the screen in step 3. Then, press
ADD/DLT to clear the time ("6" is flashing.) Now, press ON-TIMER
to end. "ON TIMER END" appears on-screen for a few seconds.
{f no button on the remote or Combination VCR (including a button
used to turn off the alarm) is pressed within 60 minutes after
Combination VCR turns itself on, it will turn itself back off.
SLEEP TIMER
Combination VCR can be set for auto power off.
Set SLEEP TIMER.
Press SLEEP repeatedly.
¢ Pressing DISPLAY with sleep timer
set displays remaining time.
To Cancel, press SLEEP repeatedly
until "SLEEP TIMER 00" appears.
SLEEP TIMER 30
SLEEP TIMER 60
SLEEP TIMER 90
SLEEP TIMER 00
14 For assistance, call 1-800-211-PANA(7262)