Sony SLV-788HF Operating Instructions Manual page 41

To ensure correct operation
* Place the Cable Mouse so that it hangs out over the cable box / DSS
receiver front.
¢ Do not place the cable box/ DSS receiver on top of the VCR.
¢ Position the cable box/DSS receiver away from the VCR.
¢ Point the remote commander at the VCR, not at the cable box / DSS
receiver.
2
4
a
SA
a
&
Side view
conan Signal flow
To check the cable box control setting
1 Press CH +/- on the remote commander. Does the channel indicator
on the cable box/DSS receiver change? (Point the remote commander
at the VCR, notat the cable box/ DSS receiver.)
2 Press all 10 number buttons (0 to 9) on the remote commander. Does
the channel indicator on the cable box/DSS receiver change?
If the answer to both 1 and 2 is "yes," you have made the correct setting.
continued
Getting Started | 41