Memory Contents 2 - Kenwood TM-241A Instruction Manual

5-4-5 Memory Contents
Each Memory channel is capable of storing the
following information. (YES :Can be stored in memory,
NO : Cannot be stored in memory)
When the DRS unit is not installed and the DTMF unit is
installed.
CH1~3| CH4~6 | CH7~10} CHi1~20
Freq.(SIMPLEX) YES YES. YES, YES
freq.(odd split) NO NO YES NO
Tone freq.
Tone/CTCSS ON/OFF YES YES YES YES
VFO freq. step YES YES. YES YES
Shift. REV ON/OFF MES! YES NO YES
DTSS cord, DTSS
ON/OFF YES NO NO NO
When the DRS unit is installed and the DTMF unit is
not installed.
CH1~3| CH4~6}| CH7~10) CH11~18
Freq.(SIMPLEX) YES YES YES YES
freq.(odd split) NO NO YES NO
Tone freq.
Tone/CTCSS ON/OFF YES pe ABP NER
VFO freq. step YES YES YES YES
Shift, REV ON/OFF YES YES NO YES
DTSS cord, DTSS YES NO NO NO
ON/OFF
22
5-4-6 Memory Entry
@Simplex/Normal shift
i.
2.
Press the VFO/MP V key to
select the VFO mode.
Select the desired operat-
ing frequency ,offset,tone
frequency,etc.( For exam-
ple 145.500MHz )
. Press the F key. The F
indicator and a memory
channel indicator will
light.( For example CH 8)
Select the desired Memory
Channel using the Tuning
control or microphone
UP/DWN switches.
(For example CH 5 )
. Press the MR/M key within
10 seconds of selecting the
Memory Channel.
A long beep will sound
and the F indicator and the
Memory Channel number
will turn OFF, and the
transceiver will return to
the VFO mode.