GIANT
Little
Pump Company
3810 North Tulsa Street
Oklahoma City, Oklahoma 73112
(405) 947-2511
BEFORE INSTALLATION:
Little Giant Wastewater Kits are carefully packaged,
inspected and tested to insure safe operation and
delivery. When you receive your unit, examine it carefully
to determine that there are no missing, broken or
damaged parts that may have occurred during shipment.
If damage has occurred, make notation and notify the firm
you purchased the unit from. They will assist you in
replacement or repair, if required. Read this manual
carefully and also the enclosed pump manual.
This unit is designed to pump wastewater from laundry
trays, washing machines, sinks or dehumidifiers. Unit is
not designed to pump raw sewage, fluids other than
water, or fluids with solids. Inlet screen will remove many
solids over 1/8" diameter, but large amounts of solids can
clog screen and result in pump failure. Maximum fluid
temperature is 125ºF. Unit is designed to fit under most
sinks so in many cases it is not necessary to recess the
unit into the floor.
OWNERS MANUAL
Little Giant
MODEL WRS-6 WASTEWATER
REMOVAL SYSTEM WITH 6-CIA PUMP
For
®
ITEMS TO PURCHASE:
NOTE: Some state or local codes require all electrical
and/or plumbing connections to be made by a licensed
contractor. It is the customer's responsibility to determine
codes involved and to comply with these codes. If user
can install unit, items to purchase are:
1. Inlet piping, with trap and union (basin cover has 1
FNPT fitting).
2. Discharge piping, with swing check valve and union
(basin cover has 1
3. Vent piping (basin cover has 2" FNPT fitting).
INSTALLATION
·
OPERATION
·
REPAIR PARTS
·
SAFETY
·
/
" FNPT fitting).
1
2
/
"
1
2
Need help?
Do you have a question about the WRS-6 and is the answer not in the manual?
Questions and answers