Table of Contents
Advertisement
Quick Links
- - - - - - - - - - - - - - - - - - - - - - - - - - -
16" 3200W POWER CUTTER SAW
- - - - - - - - - - - - - - - - - - - - - - - - - - -
OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL. KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S
SERIAL NUMBER ON THE BACK OF THE MANUAL , OR THE MONTH AND YEAR OF PURCHASE IF
FOR QUESTIONS. PLEASE CALL CUSTOMER SERVICE: 909.628.0880
I
�
TREIIE/IOUIER
ITEM: 50130
PRODUCT HAS NO SERIAL NUMBER .
us
-
-
Advertisement
Table of Contents
Summary of Contents for XtremepowerUS 50130
- Page 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - 16" 3200W POWER CUTTER SAW ITEM: 50130 - - - - - - - - - - - - - - - - - - - - - - - - - - - OWNER'S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL.
-
Page 2: Safety Warnings
SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in injury and/or property damage. Save all warnings and instructions for future reference. The warning and safety instructions in this manual are not meant to cover all possible conditions and situations that may occur. - Page 3 SAFETY WARNINGS SAFETY WARNINGS • Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 4 SAFETY WARNINGS SAFETY WARNINGS CAUSES AND OPERATOR PREVENTION OF KICKBACK: • Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator; • When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator;...
- Page 5 ASSEMBLY 1. Connect the cutting blade to the arbor using the lock nut supplied. 2. Secure the blade into the saw and tighten the bolt. 3. Place the guide over the blade and secure it in place using the screw nut provided.
- Page 6 ASSEMBLY 4. Connect the other side of the guide using a screw nut. 5. Attach the stationary knob and confirm it will allow you to adjust the depth. 6. Press in the hose adapter for water applications.
-
Page 7: Prior To Operation
OPERATION PRIOR TO OPERATION 1. Power source: Ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate. 2. Power switch: Ensure that the power switch is in the OFF position. If the plug is connected to a power receptacle while the power switch is in the ON position, the power tool will start operating immediately, which can cause a serious accident. -
Page 8: Cutting Procedures
OPERATION 2. Removal Remove the bolt with the provided wrench and remove the diamond wheel. CUTTING Wheel guard adjustment Adjust the wheel guard angle with the knob so dust and debris from the material or sparks do not contact the operator during the cutting operation. Cutting Procedures (1) Place this tool on the material to be cut and align the pre-marked line and the diamond wheel. -
Page 9: Maintenance
OPERATION / MAINTENANCE • Feed down the machine in line with the blade. Pressure from the side can damage the blade and is very dangerous. MAINTENANCE 1. Inspection of the diamond wheel A worn diamond wheel overloads the motor and reduces working efficiency. Replace it with a new one. 2. -
Page 10: Parts Information
PARTS INFORMATION... - Page 11 PARTS INFORMATION...
- Page 12 DISCLAIMER PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTO R HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS...