Tools You Will Need; Mounting Space - Tappan TMV151FSA Installation Instructions Manual

TOOLS YOU WILL NEED

# 1 and #2 Phillips screwdriver
Tin snips (for cutting
Scissors
damper, if required)
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Gloves
Safety goggles

MOUNTING SPACE

16-½ "
Installation Instructions
Pencil
Level
33"min.
2"
Backsplash
Ruler or tape measure
and straight edge
3
Electric drill with / ", ½"
16
5
and / " drill bits
8
Stud finder or Hammer (optional)
Duct and masking tape
NOTES:
• The space between the cabinets must be
Bottom edge of
cabinet needs
30" wide and free of obstructions.
to be 33" or
• This microwave oven is for installation over
more from the
cooking
ranges up to 33" wide.
surface
• If you are going to vent your microwave
oven to the outside, see Hood Exhaust
Section for exhaust duct preparation.
• When installing the microwave oven
beneath smooth flat cabinets be careful
to follow the instructions on the top
cabinet template for power cord
clearance.
7
Carpenter square
(optional)
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)