Table of Contents
Advertisement
Cleaning and care
Cleaning the AutoDos assem-
bly
If the
Clean AutoDos
played, check that the fill channel is
clean, and clean it if necessary, e.g.,
powder residues. This helps keep the
AutoDos working properly.
In order to ensure that the AutoDos
works at its best, check it each time
you replace the PowerDisk and clean
it if needed.
1 PowerDisk holder
2 Fill channel for dispensing the deter-
gent from the PowerDisk into the wash
cabinet
74
message is dis-
Turn the AutoDos lid to and open
it.
Remove the PowerDisk if appropriate.
Pull the PowerDisk holder upward by
the yellow tabs and remove it. When
doing so, do not pull on the side tab.
Use the tab (see the arrow) to re-
lease the fill channel and pull it out
.
Advertisement
Table of Contents
