Advertisement
IMPORTANT
Ÿ
Use a soft cloth between these parts and the floor.
Ÿ
Do not use power tools above 8 volts to assemble.
Ÿ
Do not tighten all the bolts until each part is properly assembled.
Ÿ
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
STEP 1
Attach Casters underneath Base (C)
with Wood Screws for Caster, with
Locking Casters on the front.
(See Figure 1)
Note: The 'Arrow' sticker
indicates the front of Base (C).
Figure 1
'Arrow' sticker at front
Head Cap Bolt
STEP 2
Attach Side Panel (A) to Base (C) with Head Cap Bolts.
(See Figure 2)
Attach Back Upright (D) to Base (C).
Slide Back Panels (E) into place.
Attach Back Stretcher (F) and Front Rail (G) to Side Panel (A) with Head Cap Bolts.
Attach Side Panel (B) to unit with Head Cap Bolts.
Assembly Instructions 2/5
'Arrow' sticker at front
A
E
C
Locking Caster
Locking Caster
F
G
D
E
Wood Screw for Caster
Non-Locking Caster
C
C
B
Figure 2
Advertisement
