Program End Search - Panasonic AG-513E Operating Instructions Manual

Program End Search
Locates end point of recording for continuity.
Press SEARCH twice in Playback or
Stop mode to display PROGRAM END
SEARCH screen.
PROGRAM END SEARCH Press FF
to start search.
SEARCH START:FF To cancel,
press PLAY or STOP.
EXIT : SEARCH
Example of Program End Search operation.
Fig.1 PLAYBACK DIRECTION —
| CORN BR CERE |
Press SEARCH button l'NEnd Point)
FF
Fig.2
[Poor] e ecc JE Program 2 | BLANK |
Press SEARCH button f
FF
Fig.3 tf search exceeds a few seconds in BLANK area.
Press SEARCH button
| Program 1
Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
* If Program End Search is started very close to an
index mark, that mark may be skipped over.
25
D
O@.
<
t
1
©
E:
s
=
3