Preparation - Beko F60096EB User Manual

4

Preparation

• Your freezer should be
installed at least 30 cm away
from heat sources such as
hobs, ovens, central heater
and stoves and at least 5 cm
away from electrical ovens and
should not be located under
direct sunlight.
• The ambient temperature of the
room where you install your freezer
should at least be 10°C. Operating
your freezer under cooler conditions
is not recommended with regard to
its efficiency.
• Please make sure that the interior of
your freezer is cleaned thoroughly.
• If two freezers are to be installed
side by side, there should be at least
2 cm distance between them.
• When you operate your freezer for
the first time, please observe the
following instructions during the
initial six hours.
• The door should not be opened
frequently.
• It must be operated empty without
any food in it.
• Do not unplug your freezer. If a
power failure occurs out of your
control, please see the warnings in
the "Recommended solutions for
the problems" section.
• Original packaging and foam
materials should be kept for future
transportations or moving.
• The baskets/drawers that are
provided with the chill compartment
must always be in use for low energy
consumption and for better storage
conditions.
• Food contact with the temperature
sensor in the freezer compartment
may increase energy consumption
of the appliance. Thus any contact
with the sensor(s) must be avoided.
• In some models, the instrument
panel automatically turns off 5
minutes after the door has closed.
It will be reactivated when the door
has opened or pressed on any key.
• Due to temperature change as
a result of opening/closing the
product door during operation,
condensation on the door/body
shelves and the glass containers is
normal
12
EN