Related Manuals for mitoredlight MitoADAPT 2.0
Summary of Contents for mitoredlight MitoADAPT 2.0
- Page 1 MitoADAPT USER MANUAL www.mitoredlight.com © 2020 Mito Red Light, Inc. All rights reserved.
- Page 2 UPGRADE YOURSELF Enhance your well being with next-gen light therapy.
-
Page 3: Table Of Contents
DEVICE TROUBLESHOOTING .......................18 MIN STAND INSTRUCTIONS ........................ 19 CONTROLLING MULTIPLE PANELS ....................21 MitoADAPT XL SERIES ........................... 24 PRODUCT COMPARISON: MitoADAPT 2.0 SERIES ..............26 LIGHT THERAPY OVERVIEW .........................28 SAFETY INSTRUCTIONS, WARNINGS, AND DISCLAIMER ............. 31 CAUTIONS & DISCLAIMER ........................32 WARRANTY POLICY.......................... -
Page 4: About Us
Mito Red Light was brought into existence in order to provide consumers truly affordable, yet highly innovative red light therapy options. If you have any further questions, please feel free to contact us at: info@mitoredlight.com You can also call our phone number Monday - Friday 9am - 5pm MST... -
Page 5: Getting Started
Modes 7-10 have only 50% of the LEDs STANDARD USE lit and can be used for gentler MitoADAPT 2.0 Series: We recommend sessions. Mode 11 is 100% NIR and is limited to 4 consecutive minutes working up to 10-minute sessions at 6- (available through the app). -
Page 6: Contraindications
Recent Burns - Recent burns may still cells eyes respond contain residual thermal energy that may be increased by heat from red unfavorably to intense red light. light therapy. www.mitoredlight.com... - Page 7 A smaller therapy may slow the body’s ability amount of red light may actually to stop bleeding. reach deeper tissues, however, this effect is not likely to be large. www.mitoredlight.com...
- Page 8 However, in rare instances users can experience the opposite effect. We suggest starting slowly and using red light only if this is a concern. A detailed discussion of this can be found in our article: Red Light Therapy & Hyperpigmentation. www.mitoredlight.com...
-
Page 9: Faqs
If you experience these types of issues, before using a device like Mito Red. we recommend stopping use until the symptoms go away. Then start out at 2-3 minutes per session area and work www.mitoredlight.com... - Page 10 DAMAGED? children should be done under adult supervision. Red light therapy has been clinically- proven to help damaged skin heal from cuts, burns, other blemishes. recommend consulting with your healthcare provider if you have any concerns. www.mitoredlight.com...
- Page 11 Users with a history of facial fillers and/ or Botox injections should consult their dermatologist prior to use. Users with breast implants should consult their plastic surgeon prior to use. Do not use the device during the healing period post Lasik eye surgery. www.mitoredlight.com...
- Page 12 GETTING STARTED: MitoADAPT 2.0 Series Step 1: Unbox your MitoADAPT 2.0 device Attach steel cables and hang (over and accessories. the door hook included). To extend the length when hanging Plug in device using the provided use one or more of the included vinyl power cord and turn the power straps and carabiners.
- Page 13 www.mitoredlight.com...
-
Page 14: Panel Controls: Mitoadapt 2.0 Series
Once a new default time is selected, press the go button to save the selection then turn off the power switch on the back of the unit and turn the switch back on. Your new default time will be displayed. www.mitoredlight.com... -
Page 15: Mitoadapt 2.0 Mode Summary
MitoADAPT Mode Summary RED & NEAR-INFRARED WAVELENGTH % RATIOS www.mitoredlight.com... -
Page 16: Mobile App User Guide
DOWNLOADING THE MITO RED LIGHT APP Make sure the Bluetooth function is enabled on your primary device. Download our the Mito Red Light app by searching the app store, using the link or by scanning the QR codes below! https://apps.apple.com/us/app/ https://play.google.com/store/apps/ mitoredlight/id1639752291 details?id=com.mitoredlight&pli=1 www.mitoredlight.com... - Page 17 Once your mode is There is also a sunrise, Select one of the 11 modes. selected, adjust your time sunset and interval mode and brightness settings then hit the start button to begin your session. www.mitoredlight.com...
-
Page 18: Device Troubleshooting
Make sure your Bluetooth permissions are accepted through your devices’ settings. Ensure Bluetooth is enabled on your mobile device and your panel. You can also access this User Manual via the app by clicking the settings icon. www.mitoredlight.com... -
Page 19: Min Stand Instructions
Step 1: The stand may be rigid when Step 2: Pull back from top to extend you first receive your light. the stand. Step 3: To open, firmly push up as Step 4: Flip over light and you are shown. ready to go! www.mitoredlight.com... - Page 20 Stand can now be Step 1: Remove four screws on outer removed from the light. part of stand with screwdriver. Step 2: After removing screws grasp Step 4: Remove rubber feet with stand cover and lift straight up. screwdriver. www.mitoredlight.com...
-
Page 21: Controlling Multiple Panels
CONTROLLING MULTIPLE PANELS If you have 2, 3 or 4 MitoADAPT 2.0 panels (MIN, MID, MAX) you can use the innovative MitoADAPT 2.0 Master Controller to operate all of them. Please note: The Master Controller is compatible with only the MIN, MID and MAX MitoADAPT 2.0 panels. - Page 22 (Continued) The Controller contains 4 magnets on the back. It is recommended to place the controller on either side of a panel Please Note: The MitoADAPT 2.0 panels can always be operated individually, however in order to control multiple panels...
- Page 23 MITOADAPT 2.0 BRACKET INSTALLATION FOR DOOR HANGING 1 MitoADAPT MAX 1 MitoADAPT MAX 1 MitoADAPT MID 1 MitoADAPT MIN Rubber feet remain on the bottom of the MitoADAPT MAX. Remove the hanging posts from the top of the bottom light.
- Page 24 . One set will need to be installed depending on the stand configuration (vertical vs horizontal). *Note - see product specific user manuals / video tutorials for bracket install instructions as the brackets vary by series- https://mitoredlight.com/pages/user-manual www.mitoredlight.com...
- Page 25 Attention: The floor to wall mounting bracket is designed to allow the bottom of the panel to be rested on the floor and with the top of the panel secured against the wall. This bracket is not intended to support the weight of the light suspended off the floor! www.mitoredlight.com...
- Page 26 Screws or anchors will be installed in the remaining 4 grooves pointed to in the image below . 4" wood screw for mounting against wood Drywall studs (not Supplied anchors for or going into a stud (not included) brick or concrete only included (included) www.mitoredlight.com...
- Page 27 Power Consumption:380W Best Used For: Full Body Treatment *Based on consumer level (solar) light meters. For comparison and reference purposes only. **Based on professional, independent laboratory testing. Can guide dosing in concert with the guidelines in the user manual. www.mitoredlight.com...
-
Page 28: Mitoadapt Xl Series
PRODUCT COMPARISON MitoADAPT XL Series *Based on consumer level (solar) light meters. For comparison and reference purposes only. **Based on professional, independent laboratory testing. Can guide dosing in concert with the guidelines in the user manual. www.mitoredlight.com... -
Page 29: Light Therapy Overview
If you remember high school physics, when you pass white light through a prism it separates out the different colors based on their wavelengths (ROYGBIV). Only a tiny part of this spectrum (roughly 400nm to 700nm) is actually visible to the human eye. www.mitoredlight.com... - Page 30 Overall, red and near infrared light has been repeatedly shown to have positive effects on cell www.mitoredlight.com...
- Page 31 "molecular unit of energy. currency" intracellular energy The specific photons found in red and transfer. When our cells have more near infrared light interact with a energy, they simply perform better and the body follows suit! photoreceptor within our cells called www.mitoredlight.com...
-
Page 32: Safety Instructions, Warnings, And Disclaimer
Ground Fault Circuit Interrupter (GFCI). DO NOT wash electrical parts with water or other liquids. DO NOT drop your device in water or other liquids or place it where it may fall into water or other liquids. www.mitoredlight.com... - Page 33 DO NOT operate this light in areas where DO NOT cover the cooling fans while it could be exposed to flammable or operating the light. combustible products vapors. Explosion or fire may occur. DO NOT store or use your device in hot temperatures exceeding degrees Fahrenheit. www.mitoredlight.com...
-
Page 34: Cautions & Disclaimer
Please wash hands after use. Please recycle your equipment at the time of disposal to help conserve natural resources and protect human health and the environment. www.mitoredlight.com... -
Page 35: Warranty Policy
180 days, buyer will be responsible for To obtain warranty service, you must product shipping charges and related first contact us at info@mitoredlight. coverage while in transit to Mito Red. com to determine the problem and the Please retain the tracking information most appropriate solution for you. -
Page 36: Refund Policy
AZ 85258 If the returned product is damaged in any way or returned in an unsellable No RMA is required. Please reference condition, shipment will your name and order number on the refused and returned to sender. return label. www.mitoredlight.com... - Page 37 User Manual and Instructional Videos This user manual and instructional videos can be found here: https://mitoredlight.com/pages/user-manual Updated October 2023 www.mitoredlight.com /mitoredlight @MitoRedLight /mitoredlightofficial @mitoredlightofficial...
Need help?
Do you have a question about the MitoADAPT 2.0 and is the answer not in the manual?
Questions and answers