Tv Controls - Panasonic TH-32H410K Operating Instructions Manual

TV Controls
• Power Indicator
Front View
Power Indicator
Note: The picture is only for reference.
• Lit in red: Standby mode.
• Lit in green: Working status.
• Unlit: Powered off.
• Rocker Button
Bottom View
\ I
. , _::rnr:
: : : ; ; : : ! ; \ :; ; ; : : : ''. ; . : : . . i: : :f/
F;;~ Mi d dl e
Left - I.' , .\. {j; )..:,-,Right
Backward
Note: The picture is only for reference.
• Press Middle:
1. In standby mode, press it to turn on the TV.
2. Without OSD, short press it to access source
menu; long press to turn the TV to standby mode.
3. With OSD, short press it to confirm a selection;
long press it to exit the OSD.
• Push Left: Decrease volume or go to left.
• Push Right: Increase volume or go to right.
• Push Backward: Channel up or go to above.
• Push Forward: Channel down or go to below.
9
•
TV Terminals
2
Back View
4
6
"!I
NI
. .
,
"''
"'
;;
~
Ns
~j
z
:!
w~
Z=>
:,o
Note: The picture is only for reference.
1. USB 1
Connect USB devices to the TV.
ml
l
i
'
Note:
1) The picture is only for reference.
3
5
2) Never remove the USB device or turn off the N
while using the USB device.
2. ANTENNA IN
Connect a coaxial cable to receive signal from
the antenna or cable.
Antenna or cable TV
Note:
1) The picture is only for reference.
2) Do not place the RF cable under the N.
3) To obtain the optimum quality of picture and sound,
the correct cable (750 coaxial} and the correct
terminal are required.
4) If a community antenna system is used, you may require
the correct connection cable and plug between the wall
aerial socket and the N.