Advertisement
LED: 3*CREE XP-E2 red LED
Battery: 1600mAh/3.7V rechargeable Lithium-ion battery
Dimensions (light unit): 41mm (L)*33mm (W)*65mm (H)
Weight (light unit): 77g
Package includes: tail light *1, USB cable *1, round seatpost pad *1, aero seatpost pad*1, short rubber band *1, long rubber band *1
Brightness level | Brightness (parameter) | Run time (hrs) | Impact resistance | Water resistance |
High | 45 | 9.5 | 1 meter | IPX4 anti-spray |
Low | 8 | 58 | ||
Flashing 1 | 300 | 2 | ||
Flashing 2 | 145 | 8.5 | ||
Rapid flashing | 30 | 27.5 | ||
Pulse flashing | 300 | 8 |
Note: The above data are tested in Lab standard and may vary by environment and user conditions.
Power button: Long press the button 0.5s to turn on/off power; Single click to cycle through brightness levels. Mode Memory circuit to remember the last used brightness level when on again.
Auto on-off: Press the power button and hold till the light blinks quickly, then release the button and the light will enter auto on-off mode.
Under this mode, the light will turn on with a vibration and will switch off automatically after staying still for 2 minutes.
When the light is on, press the power button 0.5s to turn off the light and exit auto on-off mode.
Auto power save and low battery indicator
When in low power, the light will switch to low brightness level automatically to save power.
Please charge your light when the yellow indicator light is blinking.
Micro USB charging
Standard charging time: 2.8h with Max input: 5V, DC/800mA.
(approximate values and may vary by user conditions). Built-in over-charge protection.
Charging indicator
Yellow blinking light during charging and constant yellow light when charging completed.
For aero seatpost replace the round seatpost pad with the one for aero seatpost, then use the long rubber band to fix the light to the seatpost.
Make sure the light is mounted securely before riding.
Make sure the light is mounted securely each time before riding.
Release the light from the bike while in the outdoors in case of theft.
To maintain the best performance and extending the life of the Lithium-ion battery, it's recommended:
Don't disassemble or modify the light, otherwise it may cause danger and void your warranty.
Lithium-ion battery inside, don't put the light in a fire, otherwise it may cause explosion!
Please charge the light with qualified USB power adapter, using defective USB power adapter may cause power leakage or fire disaster, etc. Ravemen is not responsible for any of such consequences.
Web site: www.ravemen.com
Tel/Fax: +86-755-29064166
Email: service@ravemen.com
Address: 620, 6/F, TaiYangNeng GuiGu Building,
Yunfeng road, Longhua, Shenzhen 518109
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download RAVEMEN TR300 - Wireless Rear Light, 300 Led Lumens Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the TR300 that isn't answered in the manual? Leave your question here.