5.0” wvga tft with touch screen display module powered by segent embedded gui board (10 pages)
Summary of Contents for HAIDAR TECHNOLOGY SNT-E640480-104-RT
Page 1
Haidar Technology will not be liable for incidental or consequential damages arising from the use of Haidar Technology products. It is the user's responsibility to protect life and property against incidental failure. Haidar Technology reserves the right to make changes and improvements to its products without providing notification.
Page 2
1. Overview: Haidar Technology SNT-E640480-104-RT is a full color TFT display module with integrated resistive touch screen. It is powered by Haidar’s SegeNT GUI Controller board and supported by Haidar’s uiLAB GUI Designer software. Please, refer to SegeNT hardware and software manuals for more information on how to use the display module and how to integrate it into your design.
5. Electrical Characteristics: SNT-E640480-104-RT requires 3.3VDC (Default) OR 5VDC (Power Select Jumper). Exceeding the supply voltage over the typical value will cause a permanent damage to the board and to the attached LCD and void your warranty. Configuration Typical Current (A) at 3.3V Max Current (A) at 3.3V...
Page 5
SegeNT NotifyHost signal 11. Pin Description (J11): Audio Speaker (Molex part # 53261-0271) Pin Name Pin # Type Tolerance Description Speaker - 3.3V Connect to 8Ohm, 0.5-1W speaker Speaker + 3.3V Connect to 8Ohm, 0.5-1W speaker Haidar Technology Page 5...
Page 6
3.3V Analog Input 4 DIO4 3.3V Digital Input/Output 4 3.3V Analog Input 5 DIO5 3.3V Digital Input/Output 5 3.3V Analog Input 6 DIO6 3.3V Digital Input/Output 6 3.3V Analog Input 7 DIO7 3.3V Digital Input/Output 7 Haidar Technology Page 6...
Initial version of this manual Hardware Limited Warranty Haidar Technology, LLC. Warrants its hardware products to be free from manufacturing defects in materials and workmanship under normal use for a period of one (1) year from the date of purchase from HAIDAR.