Advertisement
Available languages
Available languages
TM06DH
Instruction Manual & Warranty
Indoor
1-Outlet Daily Timer
1. Turn the program dial clockwise until the arrow on the dial matches the current time.
2. Insert a gray pin, arrow pointing inward, at the desired time when the lamp/device should turn on.
Insert a white pin, arrow pointing outward, at the desired time when the lamp/device should turn off.
3. Repeat step 2 for the other three white and gray pins.
4. Set the red manual override switch to 'OFF.'
5. Plug the timer into the wall outlet. Plug the lamp/device into the timer and switch the
lamp/device to 'ON.'
6. To override the program temporarily (i.e. to turn the lamp/device 'ON' when the timer is set to 'OFF'),
move the red override switch to the desired ON/OFF setting.
Note: The override switch will not work for approximately 10 minutes after a program has been executed.
PRECAUTIONS:
- For indoor use only
- In case of power failure, reset timer
- Do not use with any device which exceeds capacity of timer
- Always ensure that device plug is fully inserted into timer
- If timer needs cleaning, unplug and wipe with a dry cloth
- Do not immerse in water or any liquid
FAN HEATERS AND HEATERS WITH EXPOSED ELEMENTS SHOULD NOT BE CONNECTED TO TIMERS.
RATINGS:
125V~, 60Hz
15A, 1875W Resistive
8A, 1000W Tungsten
3/4hp
TV-5
Minimum time setting: 30 minutes
Limited One Year Warranty
AmerTac™ warrants this product to be free from defects in material and workmanship for a period of one
year from the date of purchase. AmerTac's obligations are limited to repairing or replacing any defective unit
and are effective only if such units are returned within one year of the purchase date to AmerTac, 250 Boulder
Drive, Breinigsville, PA 18031. Warranty void if damage is due to misuse or improper installation. In no
circumstance will AmerTac be liable for consequential or incidental damages relating in any way to this product.
Questions?, ¿Preguntas? 201.661.9945
©2011 AmerTac™
Saddle River Executive Centre,
One Route 17 South, Saddle River, NJ 07458
www.amertac.com
Made in China
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AmerTac TM06DH
Summary of Contents for AmerTac TM06DH
- Page 1 AmerTac’s obligations are limited to repairing or replacing any defective unit and are effective only if such units are returned within one year of the purchase date to AmerTac, 250 Boulder Drive, Breinigsville, PA 18031. Warranty void if damage is due to misuse or improper installation. In no circumstance will AmerTac be liable for consequential or incidental damages relating in any way to this product.
- Page 2 Las obligaciones de AmerTac se limitan a reparar o cambiar la unidad defectuosa y son efectivas sólo si se devuelve en un lapso de un año a partir de la fecha de compra a AmerTac, 250 Boulder Drive, Breinigsville, PA 18031.
- Page 3 AmerTac™ garantit ce produit contre tout défaut de matériaux et de main d’œuvre pendant une période de un (1) an à partir de la date d’achat. Les obligations d’AmerTac se limitent à la réparation ou au remplacement de tout article défectueux et s’appliquent seulement si l’article est retourné dans l’année de la date d’achat à...
Need help?
Do you have a question about the TM06DH and is the answer not in the manual?
Questions and answers