Table of Contents
Advertisement
FCC Part 15 C Notice
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC/ IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and
your body.（For Drone only）
Cet équipement est conforme aux limites d'exposition aux radiations FCC/IC établies pour un environne-
ment non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre
le radiateur et votre corps.(Uniquement pour Drones)
ISED NOTICE: CANADA ONLY.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development
Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B) / NMB-003(B)
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
WARNING!
Requires Speed Class 10 or higher microSD or
CHOKING HAZARD - Small parts.
microSDHC card(not included)
Not suitable for children under 3 years.
microSDHC Logo is a trademark of SD-3C, LLC.
Conforms to safety requirements of FCC, RSS247, RSS210.
Ascend Aeronautics™ is the registered trademark of AMAX Industrial Group LTD.
Office No.3,10/F Witty Commercial Building 1A-1L Tung Choi street, Mongkok.
Kowloon Hongkong © 2023 All Rights Reserved.
15
PREMIUM HD VIDEO DRONE WITH ULTRA-WIDE
LENS AND OPTICAL FLOW TECHNOLOGY
WARNING: Never leave your drone charging unattended for extended periods of
Costco Wholesale Canada Ltd.*
time. Always disconnect the battery from charger immediately after the battery
415 W. Hunt Club Road
Ottawa, Ontario
K2E 1C5, Canada
1-800-463-3783
www.costco.ca
* faisant affaire au Québec sous
le nom les Entrepôts Costco
ASC-2680
Made in China
CT-6483
C004-CA-V1.0
ASC-2680
INSTRUCTION BOOKLET
is fully charged. Please refer to the enclosed safety instructions.
PACKAGE CONTAINS:
2.4G Wireless
Spare Parts
USB Charger
Phone Holder
Controller
Colors and styles may vary slightly from photos
ON BOARD
ON BOARD
HD CAMERA
HD VIDEO
1920 x 1080 pixels
25 frames per second
Battery
micro SD
Set of 4 AAA
Batteries
Card Reader
for Controller
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Costco ASC-2680
- Page 1 Not suitable for children under 3 years. microSDHC Logo is a trademark of SD-3C, LLC. * faisant affaire au Québec sous le nom les Entrepôts Costco Conforms to safety requirements of FCC, RSS247, RSS210. Ascend Aeronautics™ is the registered trademark of AMAX Industrial Group LTD.
- Page 2 • Push button Auto Start, Hover, and Auto Land technology How To Expand And Fold Your ASC-2680 Arms ......2 •...
- Page 3 ASC-2680. 2. Insert the battery into the ASC-2680 and set it down on a flat level surface. Press down the power button and hold for a few seconds (see diagram G). The LED lights on the drone should begin to flash rapidly .
- Page 4 Simply press and hold the Speed Setting Button; till you hear a long beep, the lights on the arms start Move the right direction control stick to the right slowly flashing, now you are in T Mode. T mode allows you to learn how to operate your ASC-2680 at a and the ASC-2680 will bank/sweep to the right very slow speed.
- Page 5 1. Place the ASC-2680 on a very flat and level surface. 2. Make sure the ASC-2680 is turned on and that the controller is synced (refer to syncing pg 4). Do not start the blades! Instead move both the throttle and control stick down and to the right hand bottom corner (see diagram P).
- Page 6 “two teeth” into the two holes on the top of the controller and then proceed to click in the ASC-2680 App you will be able to stream and record both videos and still photos directly to your mobile device bottom (see diagram S).
- Page 7 /asc-2680/ios.php /google-android.php 1. The ASC-2680 has four sets of blades, two sets of blades with indication letters A & B on front, and two sets of blades with indication letters B & A on the rear (see the diagram T).
- Page 8 Stand away from the ASC-2680 to reduce the risk of Limited 90-Day Warranty getting into the flight path. Warn spectators that you will be flying your ASC-2680 so that they are aware NORTH AMERICA of its position.
Need help?
Do you have a question about the ASC-2680 and is the answer not in the manual?
Questions and answers
Where does the as card go
The Costco ASC-2680 microSD card goes into the SD card port on the ASC-2680 drone. Push it gently until you hear and feel a “click” indicating it is securely inserted.
This answer is automatically generated
Can I purchase a replacement motor for the rotor blade?
How can I purchase replacement rotor blades?