Table of Contents
Advertisement
Quick Links
BEFORE INITIAL USE
If you are using the kettle for the first time, it is recommended that you clean your kettle before use
with mild soap and water. It is also recommended that you boil a full kettle of water and discard
before using.
OPERATION
To fill the Kettle with water remove it from the power base and open the lid by pressing down. The
Kettle has minimum (16 Oz) and maximum (60 Oz) marks. Too little water will result in the Kettle
switching off before the water has boiled.
NOTES:
•
Do not fill the water over the maximum level, as water may spill out of the spout
when boiling.
•
Ensure that the lid is firmly closed before connecting the power cord to the outlet.
•
After the lid is securely closed position the Kettle on the power base. Make sure the Kettle is in
contact with the power base completely.
•
Connect the Kettle to the Power Base. The light at the bottom of the kettle will start with red,
move to green and then move to white. The kettle has then completed startup and enters
the active state.
•
In the active state the Kettle defaults to the initial setting of Boil and waits for the next
operation.
WHAT'S IN THE BOX
Infuser
Kettle
GETTING TO KNOW YOUR
KETTLE
Lid
Glass Body
Light
Base
Customer Service: (877) 246-0990
DIGITAL KETTLE
Filter
QUI C K START GUIDE
Power Base
Control Panel
Handle
INFUSER
WITH
MODEL: SLT-4408
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sur la table SLT-4408
Summary of Contents for Sur la table SLT-4408
- Page 1 The kettle has then completed startup and enters the active state. Base • In the active state the Kettle defaults to the initial setting of Boil and waits for the next operation. Customer Service: (877) 246-0990 MODEL: SLT-4408...
- Page 2 FUNCTIONS POURING WATER DISPLAY PANEL Lift the Kettle from the power base and then pour the water. Temperature Temperature Keep Warm Keep Warm Function (°C) (°F) Temperature (°F) Time (Min) The Kettle may be stored on the power base when not in use. NOTE: Ensure the lid is firmly closed.
Need help?
Do you have a question about the SLT-4408 and is the answer not in the manual?
Questions and answers
I add water to the kettle and the water pours out of the bottom and does not hold any water
If your Sur la Table kettle SLT-4408 leaks water from the bottom, first check that the kettle is not overfilled beyond the maximum level and that the lid is firmly closed before use. If it still leaks while following proper usage, the kettle may be damaged or have a faulty seal. Discontinue use and inspect for visible cracks or damage. If damage is found, the kettle may need to be repaired or replaced.
This answer is automatically generated
Can you do fine coffee
The Sur la Table SLT-4408 is a kettle, not a coffee maker. It heats water to various temperatures, which can be useful for brewing different types of tea or preparing water for coffee, but it does not brew coffee itself. Therefore, it cannot directly make fine coffee.
This answer is automatically generated
can i get a replacement spout filter for the st-4408 kettle. ours ended up in the disposal.