Larson Electronics TPM-LEDLB-32E Instruction Manual

96W LED Light Bar w/ Telescoping Aluminum Pole Mount
- 5760 Lumens - 3-8.5' - 9-42VDC - Cord Options
Thank you for your purchase of the Larson Electronics LEDXUL-32E LED Light Bar. Please follow the steps
below in order to install, operate and maintain this product.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. THE LEDXUL-32E MUST BE WIRED IN ACCORDANCE WITH NATIONAL ELECTRICAL CODE AND
ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.
WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, AND MAINTAIN THIS PRODUCT. IF
YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET, CONSULT
AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.
WARNING: MAKE SURE POWER IS TURNED OFF BEFORE STARTING THE
INSTALLATION OR PERFORMING ANY MAINTENANCE.
RISK OF FIRE/ELECTRIC SHOCK –
RISK OF PERSONAL INJURY –
RISK OF BURN –
ALLOW FIXTURE TO COOL BEFORE SERVICING.
MOUNTING
The TPM-LEDLB-32E features an adjustable mounting pole that has a pneumatic braking system to prevent
unexpected or sudden collapses of the pole. The telescoping pole stands 3 feet tall when fully closed and can
reach heights up to 8 feet when fully extended. It is ideal for boats as operators can mount this next to the
console and elevate the lights starting at three feet up to eight and a half feet to illuminate the boat and the
surrounding area. By elevating the lights this high, they can eliminate casting and glare while better
illuminating a larger area. Essentially, this adjustable pole provides the benefits of having a mast mounted light
without actually having a mast. Once the lights are no longer needed, the pole can be collapse down to three
feet and the lights secured before getting underway. Similarly, these poles are ideal for attaching lights to
trailers. Operators can park the trailer, extend the lights to their maximum height, and illuminate a large area
around the trailer. Once finished with their use, the pole is simply collapsed and the lights stowed for travel.
This is a highly convenient setup for those who manage events and gatherings where trailers are used as
portable operations areas.
This adjustable telescoping pole is designed to be mounted to any vertical surface via an included mounting
plate with four predrilled mounting holes. Users can simply attach the mounting plate to a wall, trailer, the
exterior of boat cockpits etc, then slip the pole into the bracket and lock it into place. This pole also features a
pneumatic braking system that prevents unexpected or sudden collapse of the pole. If the pole is loaded with
a pair of heavy fixtures for instance and the operator inadvertently releases the locking tabs, the pole will
simple ease down gently rather than suddenly collapse. This is a great feature when mounting expensive
electronic devices and you would like the added security of knowing there is no chance of serious damage
should the pole be released.
ANGLE ADJUSTMENT
This unit allows operators to adjust the angle of the entire unit by positioning the trailer hitch at different
angles. Adjusting the angle of the tower is accomplished by loosening a thumb bolt at the base of the hitch,
which enables the mount to swivel 180 degrees (given enough ground clearance, a greater swivel angle can
be achieved.) Once the desired angle is found, simply retighten the thumb bolt to lock the hitch into place.
Larson Electronics, LLC
Instruction Manual
DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.
FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.
Phone: (800) 369-6671 Fax: (903) 498-3364
TPM-LEDLB-32E
www.larsonelectronics.com
1 of 3