〓〓〓〓〓〓 4. Menu Setting 〓〓〓〓〓〓
4.1 Operating Instructions:
1. Long press CMENU/KMENU to open the keyboard menu; Adjust the joystick
Up and Down to view the menu options; Right to enter the next option; Left to return
to the previous option, short press CMENU/KMENU can also return to the previous
option; numeric keys 0~9 can set the corresponding parameters in some options.
2. In the keyboard menu, you need to set the corresponding protocol, address in
order to control the camera properly.
4.2 Menu options:
Language
Brightness
BackLight
Screen Prt
DHCP
System
setting
Locol IP
Mask
Gateway
Run Link
Reset
Camera
Protocol
IP Addr / Address
Camera
setting
Port / Baundrate
Username
Password
PTZ
Pan Reverse
setting
Chinese/English
1~15
AUTO/ON/OFF
10s~180s
OFF/ON
192.168.001.180(Can be set)
255.255.255.000
192.168.001.001
OFF/ON
NO/YES
The keyboard can be set with 7 addresses: CAM1~CAM7
VISCA Serial, Pelco-P, Pelco-D, VISCA over IP, VISCA TCP,
VISCA UDP, ONVIF, NDI(
Set the camera IP address or camera address.
Set the port or baud rate.
Default port numbers for each IP protocol:
ONVIF: 8000, NDI: 5961, VISCA: 52381
Username setting, default: admin
Password setting, default: admin
The left and right direction of the keyboard control can be switched.
11
optional
)