Download Print this page

JAMES ALLEN QICFA50960OB Installation Instructions Manual

Advertisement

Quick Links

Advertisement

loading

Summary of Contents for JAMES ALLEN QICFA50960OB

  • Page 3: Mounting Options

    3. MOUNTING OPTIONS 1. Disconnect the power by removing fuses or turning off circuit breakers. Fig. 1 Ceiling Joists 2. If there is an existing outlet box, ensure it is clearly marked "Suitable for Fan Support of 50 lbs (22.7 kg) or lesse". If it is not so marked, it must be replaced with an approved one.
  • Page 4: Attaching The Fan Blades

    5. ATTACHING THE FAN BLADES WARNING -Turn off the power! Fig. 5 Fig. 7 NOTE: Please see the label of the blade side up as illustration shown for assembly. Blade deco bar Fan blade screws (Screw No. 1) 1. Slide the blade deco plate to position Blade deco bar Hole the blade hole on the center of the blade.
  • Page 5 6. ATTACHING THE BLADE ARMS WARNING -Turn off the power! Fig. 9 1. Carefully lift the blade circle to the fan assembly. (Fig. 9) Important assembly process, it is a must to require 3 persons at least to lift the blade circle evenly onto the fan body and positioning the blade holes at inner circle.
  • Page 7 8. COMPLETING INSTALLATION 1. Make sure the wiring is safely inside the Fig. 15 Fig. 17 outlet box as instructed in Step 5 - Electrical Connections. To install the Outlet box canopy, slide the canopy up to hanger bracket and place the key hole on the canopy over the screw on the hanger Hanger bracket...
  • Page 8: Installing The Wall Control

    9. INSTALLING THE WALL CONTROL REMEMBER -Turn off the power! Fig. 18 3. (Fig. 18) Carefully tuck the wire Hook up in "series only" do not connect connections inside the junction box. the hot and neutral wires of electric Secure the wall control with the two circuit to the transmitter wall switch - screws provided.
  • Page 9 11. FAN OPERATION AND CARE 1. A ceiling fan is an environmentally 3. Clean you fan periodically using only Fig. 21 smart choice to cool as well as to help a cloth dampened with a mild detergent warm your home or office. Adjust your solution for all hardware - never use HVAC thermostat during fan use to save solvents.