Advertisement

Quick Links

Art. 884034
Art. 774044
Art. 884033
Art. 884032
Art. 774055
Art. 884031
Art. 054052
Art. 776082
Art. 774054
Cod. 774044
Cod. 776082
Cod. 774054
Cod. 774055
MANUTENZIONE E PULIZIA
Per una corretta manutenzione e pulizia di questo
prodotto, raccomandiamo alcuni semplici accorgimenti:
• Utilizzare detergenti neutri, spruzzando il prodotto
direttamente su un panno morbido onde evitare
infiltrazioni
• Evitare sempre il contatto con prodotti acidi o abrasivi
• Risciacquare bene con abbondante acqua per eliminare
eventuali residui ed asciugare sempre con un panno
morbido
• Effettuare una pulizia periodica al fine di prevenire le
formazioni calcaree
La BELLOSTA CARLO & C. non è RESPONSABILE di
danni derivati dall'utilizzo di prodotti impropri per la
pulizia.
Cod. 884034
Art. 054053
Cod. 884032
Cod. 054052

MAINTENANCE AND CLEANING

For a proper maintenance and cleaning, we
recommend the following:
• Use neutral detergents , avoiding to spray directly
on taps to avoid residual infiltration
• Avoid contact with acid or abrasive products
• Rinse with water and always dry with a clean cloth
to avoid residue of detergent
• Perform a periodic cleaning to prevent limestone
deposits
BELLOSTA CARLO & C. cannot be held responsible
for damages due to an improper use of detergents
ISTRUZIONI revivre
Cod. 884033
Art. 0512/H/P
Cod. 884031
Cod. 054053
Art. 0512/3H/P
MADE IN ITALY
Questo prodotto è stato realizzato interamente
in Italia con l'utilizzo di materie prime di altissima
qualità
Art. 0512/2H/P
Art. 0512/4H/P
DESIGN
MADE IN ITALY
EQB
This product has been entirely manufactured
in Italy, by top quality raw materials.
Rubinetti d'autore dedicati a te

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 0512/H/P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BELLOSTA 0512/H/P

  • Page 1 MADE IN ITALY formazioni calcaree BELLOSTA CARLO & C. cannot be held responsible La BELLOSTA CARLO & C. non è RESPONSABILE di Questo prodotto è stato realizzato interamente for damages due to an improper use of detergents This product has been entirely manufactured...
  • Page 2 RIMUOVERE PELLICOLA DALLA GUARNIZIONE BIADESIVA TAKE OFF FROM THE GASKET THE BY-ADHESIVE FILM CHIAVE A BRUGOLA HEXAGONAL 2,5mm CHIAVE A BRUGOLA HEXAGONAL 2,5mm CHIAVE A BRUGOLA HEXAGONAL N° INTAGLI DA TAGLIATE TAGLIARE ASTE BROCCIATE ALLE ASTE BROCCIATE E VITI NUMBERS OF NOTCH TO BE CUT BROACHING RODS AND CUT FROM BROACHING ROD SCREWS...
  • Page 3 WALL INCLUSIVE OF COVERING n°2pz 774045 68 MISURA IDEALE La BELLOSTA CARLO & C. non è RESPONSABILE di BELLOSTA CARLO & C. cannot be held responsible for 56 - 80 68 IDEAL MEASURE danni derivati dall'utilizzo di prodotti impropri per la damages due to an improper use of detergents pulizia.
  • Page 4 SOSTITUZIONE VITONE ART. 055034 RIGHT CERAMIC VALVE REPLACEMENT ART. 055034 1° OUT 3/4" 2° OUT 3/4" CH 14 mm 3° OUT 3/4" 4° OUT 3/4" IN 3/4" IN 3/4" 2° OUT 3/4" 3° OUT 3/4" 1° OUT 3/4" 4° OUT 3/4" IN 3/4"...
  • Page 5 Join in to the maintenence manual, to keep as well. maintenence manual, to keep as well. La BELLOSTA CARLO & C. non è RESPONSABILE di BELLOSTA CARLO & C. cannot be held responsible for La BELLOSTA CARLO & C. non è RESPONSABILE di BELLOSTA CARLO &...
  • Page 6 Join in to the maintenence manual, to keep as well. maintenence manual, to keep as well. La BELLOSTA CARLO & C. non è RESPONSABILE di BELLOSTA CARLO & C. cannot be held responsible for La BELLOSTA CARLO & C. non è RESPONSABILE di BELLOSTA CARLO &...
  • Page 7 PULIZIA CARTUCCIA / THERMOSTATIC VALVE CLEANING PULIZIA CARTUCCIA / THERMOSTATIC VALVE CLEANING CHIAVE A CHIAVE A BRUGOLA BRUGOLA HEXAGONAL HEXAGONAL Aiutarsi con uno spillo Aiutarsi con uno spillo per estrarre il tappino per estrarre il tappino Use pin to extract cap Use pin to extract cap DATI TECNICI / TECHNICAL DATA DATI TECNICI / TECHNICAL DATA...
  • Page 8 AVVERTENZE AVVERTENZE AVVERTENZE AVVERTENZE WARNINGS WARNINGS WARNINGS WARNINGS NON FORZARE NELLA ROTAZIONE NON FORZARE NELLA ROTAZIONE NON FORZARE NELLA ROTAZIONE NON FORZARE NELLA ROTAZIONE DO NOT OVERLOAD DURING ROTATION DO NOT OVERLOAD DURING ROTATION DO NOT OVERLOAD DURING ROTATION DO NOT OVERLOAD DURING ROTATION AVVERTENZE AVVERTENZE AVVERTENZE...

This manual is also suitable for:

0512/2h/p0512/3h/p0512/4h/p

Table of Contents