Summary of Contents for RANGE MART RANGE TARGET
- Page 1 RANGE TARGET ASSEMBLY INSTRUCTIONS WWW.RANGEMART.COM • 4142 ADAMS AVE SUITE 103217 • SAN DIEGO, CALIFORNIA 92116 GOLF@RANGEMART.COM • 877.741.2678...
- Page 2 PARTS The Range Target consists of the following assembly parts: 1) Base (1) 2) Top Hoop with Net (1) 3) Back Legs (2) 4) Front Leg (1) 5) Tee-Insert (6) WEIGHT Target can be secured to ground with stakes, but you must drill holes through base. Or use dry playground sand (not included) if added weight is required.
- Page 3 3) After Back Legs are secure, insert Front Leg into Tee-Insert on base. The curvature of the leg should be placed as show above. Gently tap into place with rubber mallet. 4) Place the Top Hoop on top of Back Legs lining up the Hoop Tee-Inserts into the top of the Legs.
- Page 4 5) After Back Legs are secure, line up Front Leg with Top Hoop and secure Front Leg with rubber mallet. WWW.RANGEMART.COM • 4142 ADAMS AVE SUITE 103217 • SAN DIEGO, CALIFORNIA 92116 GOLF@RANGEMART.COM • 877.741.2678...
- Page 5 WWW.RANGEMART.COM • 4142 ADAMS AVE SUITE 103217 • SAN DIEGO, CALIFORNIA 92116 GOLF@RANGEMART.COM • 877.741.2678...