Download Print this page

RAINSHOWER REVIVE XSER-RS Instruction Manual

Shower filter

Advertisement

Quick Links

• Do not use any type of sequestering agent (polyphosphates) ahead
of the filter.
• Product effectiveness may be reduced when used with water systems
containing high levels of iron or with systems that use chemicals
such as polyphosphates.
WARRANTY
The manufacturer warrants the product to be free from defects in
materials and workmanship when installed, operated, and maintained
in the manner instructed in this document. Filter housing is warranted
for a period of one year from the date of purchase. The filter cartridge
is warranted for a period of 90 days from the date of purchase. The
manufacturer will repair or replace any shower filter that fails to perform
due to faulty materials or workmanship. Items not covered under the
warranty include: damage due to misuse, improper maintenance,
improper installation, excessive water pressure or temperature, freezing,
or general misapplication of the product's use and purpose. There are
no warranties, expressed or implied, other than those stated herein.
Rainshower is not liable in any way for any damages arising from the
misuse or misapplication of this product. To make claims under this
warranty, please contact your Rainshower dealer.
7251 Cathedral Rock Dr.,
Las Vegas, NV 89128
702.483.4410
www.rainshower.com
For shipping and orders: orders@rainshower.com • For new dealer
inquiries, product questions, and general information: marketing@
rainshower.com • For all other inquiries: headquarters@rainshower.com
F546-RS / 0723
INSTRUCTION GUIDE
Thank you for your purchase of Rainshower's Revive Shower Filter. The
Revive is tested by WQA according to NSF/ANSI Standard 177 to treat the
chlorine in your shower for up to 20,000 gallons of water.
NOTE: This product contains non-toxic granular filter media,
produced within the regulations of The Safe Drinking Water Act
(PL 99-339, June 19, 1986).
Some of the smallest grains of filtration media may shake out during
shipping and handling. This is normal, and does not mean that the filter
is defective or damaged in any way. When the filter is wet, the grains are
held together and are not flushed out by the water flow during operation.
The operational life of this product may vary depending on the quality
of the source water and proper maintenance. Areas with high levels of
particulate matter in the source water, or excessive scale buildup in the
pipes may result in a reduction in water flow. This product and installation
shall comply with state and local regulations, and is not intended for use
as a drinking water treatment unit.
REVIVE
Shower Filter

Advertisement

loading

Summary of Contents for RAINSHOWER REVIVE XSER-RS

  • Page 1 Rainshower is not liable in any way for any damages arising from the pipes may result in a reduction in water flow. This product and installation misuse or misapplication of this product.
  • Page 2 4. If your shower uses a handheld showerhead: SPECIFICATIONS INSTALLATION a. For a standalone handheld showerhead: 1. Remove the existing showerhead by rotating it counter-clockwise to unthread XSER-RS i. Attach the shower filter before the showerhead mount, or from the shower arm pipe. Approximate Filter Capacity 20,000 gallons ii.