Polaroid PLSTN36BK User Manual

PLSTN36BK, PLSTN36BL
Wireless Headphones
User Guide
Have you got everything?
1 2
1. Micro SD Card Slot
2. + Button
3. - Button

Operation

Power on and pair with a Bluetooth device
Press and hold the
indicating it is ready to pair with a Bluetooth device. Turn your smart phones Bluetooth
and select "PLSTN36XX" on the list of available devices. Once successfully, you will hear a
notification sound and the LED status indicator will light up blue. Music from your smart phone
will now be played through the headphones.
• Press the - button to play the previous song. Press and hold the - button to decrease the
volume level.
• Press the + button to play the next song. Press and hold the + button to increase the
volume level.

Bluetooth call function

Once successfully connected to your smart phone, you can answer/reject incoming phone
calls. Press the
the call. Press the
• Press and hold the - button to decrease the volume level.
• Press and hold the + button to increase the volume level.

Radio function

Press the M button repeatedly until the headphone is on Radio mode. Press the
start auto searching for FM stations, the LED status indicator will flash. After auto search, the
headphone will store the FM stations.
• Press the - button to play the previously saved FM station. Press and hold the - button to
decrease the volume level.
• Press the + button to play the previously saved FM station. Press and hold the + button to
increase the volume level.

AUX mode

Connect a 3.5mm audio cable to the Aux In port of the headphone and the other end to your
audio device. The headphone will automatically switch to AUX mode and power off.

Micro SD mode

Insert a Micro SD card to the Micro SD port of the headphone. The Headphone will
automatically switch to Micro SD mode and you can use the - and + buttons to decrease/
increase volume.

Power off and charging

When the battery is low, a voice prompt " low battery, please charge" will be heard. Connect
the supplied micro USB charging cable to the micro USB port and the other end of a USB
power source. The LED status indicator will light up red during charging and disappear when
fully charged.
Press and hold the
it will automatically power off after 5 minutes.

Buttons on the Headphones

3 4 5 6
4. LED Status Indicator
5. AUX In Port
6. Built-in Microphone
button on the headphone. The LED status indicator will red/blue,
button to answer in an incoming call. Press and hold the
button twice to redial the most recent phone number.
button to power off the headphone. If not paired with a Bluetooth device,
D
M
7 8 9
7.
8.
9.
A. Wireless Headphones
B. Micro USB Charging Cable
C. User Guide
D. Warranty Certificate
Micro USB Port
MODE Button
Button
button to reject
button to