Denon DHT-C210 Owner's Manual page 29

Contents Connections
Switching the standby linking via HDMI
control function on or off
In the default settings, the HDMI control automatically puts the unit into
standby mode, linked to the TV's power standby operation. When the
standby linking via HDMI control function is turned off, music playback can
continue without this unit switching to standby, even if the TV is set to
standby while a music player or other device is connected and playing.
1
Press and hold MOVIE for 5 seconds or more.
The standby linking via HDMI control function switches on or off
0
and the status LED blinks as indicated below.
On
Standby linking
(Default)
via HDMI control
Off
function
Playback Settings
Automatically turning on the power according
to the playback of the playback device (Auto
on control function)
If you turn on the auto on control function and playback is started by the playback
device while this unit is on standby, the power of this unit is automatically turned on
and playback is started. In addition, if the power is on, the input source is
automatically switched according to the playback of the playback device. The auto
on control function can be set to on or off for each input source.
1
Switch to the input source you want to set.
2
On the remote control unit, press the button that corresponds
to the input source you want to set for 5 seconds or longer.
Input source
TV (HDMI eARC/ARC)
OPTICAL IN
AUX IN
The status LEDs in the display of the current input source blink three times.
Auto on control
[Ex.] Input source:
TV (HDMI eARC/ARC)
29
Tips
Button
TV
OPT
AUX
On
(Default)
function
Off
Appendix