Download Print this page

Advertisement

Quick Links

MODEL: NSD10048
PACKING DIAGRAM
� ARD CARDBOARD
� ORNER
SlYROFOAM:
'----"'�------11GHT AND
TRANSFORMER
HARD
CARDBOARD
CORNE �
ID AND LED LIGHTING
(2) CORD COVERS,
CHANNEL, (2) PLASTIC
ANCHORS AND
'<-----+1OUNTAIN BODY
(2) WOOD SCREWS
HARD
CARD BOAR�
CORNE

Advertisement

loading
Need help?

Need help?

Do you have a question about the NSD10048 and is the answer not in the manual?

Questions and answers

Summary of Contents for LOWES NSD10048

  • Page 1 MODEL: NSD10048 PACKING DIAGRAM � ARD CARDBOARD � � ORNER SlYROFOAM: '----"'�------11GHT AND TRANSFORMER HARD CARDBOARD � CORNE � ID AND LED LIGHTING (2) CORD COVERS, CHANNEL, (2) PLASTIC ANCHORS AND '<-----+1OUNTAIN BODY (2) WOOD SCREWS HARD CARD BOAR� �...
  • Page 2: Parts List

    You should have received the following parts in the package. Please ensure that all parts are accounted for. FOUNTAIN BODY PUMP ACCESS DOOR WITH LIGHT LIGHT TRANSFORMER & SWITCH PUMP NSD10048 Parts List REPLACMENT PART (LIGHT): LTAS1001 REPLACMENT PART: LTAS1001 REPLACMENT PART: PUMP1560...
  • Page 3 Care and Instruction Manual...
  • Page 4: Choose A Location

    NSD10048 ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. SUGGESTED TOOLS NOT SUPPLIED PHILLIPS DRILL LADDER PENCIL SAFETY GOGGLES LEVEL SCREWDRIVER More than one person may be required to complete the assembly of this product.
  • Page 5 NSD10048 ASSEMBLY INSTRUCTIONS Place pump (D) into fountain body (A), feed pump cord through gap between fountain face and back. Attach pump (D) to rubber hose. Rubber hose Feed light cord (B) through gap between fountain face and back. Place pump access door with light (B) into fountain...
  • Page 6 NSD10048 ASSEMBLY INSTRUCTIONS Place mounting bracket (E) on wall in desired location, ensure it is level and mark holes. Drill 6 mm (1/4”) pilot holes on marked spots and insert (3) anchors (J). (If fastening to studs, skip this step.) Secure mounting bracket (E) to wall with (3) supplied screws (I).
  • Page 7: Final Steps

    NSD10048 ASSEMBLY INSTRUCTIONS Optional, if not using cord covers skip to step 7. Place cord channel (G) on wall and mark holes. Drill 6 mm (1/4”) pilot holes on marked spots and insert (2) anchors (J). (If fastening to studs, skip this step.) Attach cord channel (G) to wall with (2) supplied screws (I).
  • Page 8 NSD10048 ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To clean the pump To keep water clean Unplug the pump from the electrical Periodically change water outlet. Use a small soft brush or place it to prevent algae buildup. under a water stream to remove debris.
  • Page 9 NSD10048 ASSEMBLY INSTRUCTIONS WATER FEATURE WARNINGS & TROUBLESHOOTING • Splashing may occur when the fountain is first turned on, protect surrounding surfaces as needed. Do not place the water feature on or near any surface that can be damaged by water.
  • Page 10: Frequently Asked Questions

    NSD10048 ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur.
  • Page 11 NSD10048 ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How much water do I need to keep in the water feature? Where possible in our water features, we have included fill lines to help you visualize the water level required for proper function. If your water feature does not include fill lines, please check the instruction manual for water capacity.
  • Page 12 NSD10048 ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How do I change my pump speed? Depending on the type of pump, you will need to either move the slider or turn the knob. Flow control valve Maximum Minimum How do I clean my pump? 1.