Summary of Contents for CHEFOOK CT74SGG
- Page 1 Instructions for installation, use e maintenance GAS FRY TOP CT74SGG CT74GGG · CT76SGG CT76SGGG · 01 2016...
- Page 2 CHARACTERISTICS Supplied by: Date: Customer Service: e-mail 0818_GB_99 - GAS FRY TOP 01/2016 2 · 12...
- Page 3 INDEX Diagram Characteristics of the appliances Technical data 4 Installation instructions 4.1 Safety rules 4.2 Structure, framework and safety devices of the appliances 4.3 Assembly 4.3.1 Installation premises 4.3.2 Statutory regulations and technical requirements 4.3.3 Installation 4.3.4 Gas connection 4.3.5 Equipotential Operation preparation 5.1 Preparation and Start-up 5.1.1 Start-up...
- Page 4 1 - DIAGRAM CT76SGG g ¡ ¢ £ ¤ ¤ CT76SGGG CT74GGG U ¥ T § 2 ! " # 2 ! " # Gas 1/2" Gas 1/2" T ¨ © T ¦...
-
Page 5: Characteristics Of The Appliances
THE APPLIANCE MUST BE INSTALLED BY QUALIFIED PERSONNEL. 20 mbar 3 - TECHNICAL DATA Model Description Dimensions in mm. (LxDxH) Area plate CT74SGG Smooth plate gas Fry Top 400 x 700 x 900 0,165 dm 51BS3544 Grooved plate gas Fry Top 400 x 700 x 900... -
Page 6: Installation Instructions
4 - INSTALLATION INSTRUCTIONS 4.1 Safety rules 4.3.3 Installation Before installation, gas connection, power check, conversion or • Installation, modifications and maintenance of the appliance adjustment and start up ask for gas supply company advice. must be carried out by authorised personnel in compliance with current safety standards. -
Page 7: Set-Up For Operation
5 - SET-UP FOR OPERATION 5.1 Preparation and Start-up If you wish to further check the nominal power, you may do so by using a gas meter according to the so-called "volumetric method". A simple inspection is usually enough to check if injectors are func- Before starting up the appliance, remove the protective wrapping. - Page 8 5 - SET-UP FOR OPERATION 5.1.5 Power check for operation with liquid gas 5.1.9 Conversion and adjustment Check if the type of injectors used meet the data of the table 1. To change over form one kind of gas to another, for example from methane to liquid gas, or to another type of gas, the use of suitable Check that the pressure reducer installed in the system has an outlet injectors for the main burner is required, in accordance with the...
-
Page 9: Maintenance
5 - SET-UP FOR OPERATION After the replacement check the seal using a leack detector spray. 5.3.5 Burner fry top 600 Unscrew the screws (pos. 2 and 5 fig. 2B) fixing the burner to the injector-holder collector nuts (pos. 4 fig. 2B) and on the combustion 5.1.12 Setting reduced capacity power chamber, lift up the burner (pos. -
Page 10: Safety, Cleaning And Repair Rules
6 - INSTRUCTIONS FOR USE 6.1 Safety, cleaning and repair rules Special precautions It is recommanded to keep cleaning the plate during use, • This appliance is used for the preparation of meals at industri- using a scraper or a dampf cloth to remove particles of food al level. - Page 11 6 - INSTRUCTIONS FOR USE • 1.4016 or 1.4511 = magnetizable chromed steels 6.6.3 The 2002/96/EC (WEEE) Directive: • 1.4301, 1.4401 and 1.4571 = non-magnetizable chromed steels information to users Chromed steels have favourable thermo-technical characteristics. In This informational note is meant only for Fig.
- Page 12 WARNING THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY INACCURACIES IN THIS BOOKLET DUE TO COPYING OR PRINTING ERRORS. DUE TO ITS POLICY OF CONTINUAL PRODUCT IMPROVEMENT, THE MANUFACTURER RESERVES THE RIGHT TO MAKE ANY CHANGES DEEMED NECESSARY. THE MANUFACTURER CANNOT BE HELD RESPONSIBLE IF THE INSTRUCTIONS CONTAINED IN THIS MANUAL ARE NOT OBSERVED.
Need help?
Do you have a question about the CT74SGG and is the answer not in the manual?
Questions and answers